Roofs

CodeUDescriptionPrice
RE0317

Inclined cover with tile cover. Thermochip and Texaplac base.

Training of inclined roof with an average slope of 26%, on laminated wooden beams (not included in this price), composed of the following elements: chain sandwich panel, composed of: upper face of hydrophift agglomerate board of 10 mm of thickness, polystyrene foam insulator core of 60 mm thickness and lower face of natural spruce frieze, on structural frame; Waterproofing: plate under tile fixed with screws to support; Coverage: Curved ceramic tile, 40x19x16 cm; Picked with screws thread-wood on wooden wooden ribs treated or red pine, 42x27 mm and quality wine. Even p / p caring tile p, lateral finish, ventilation and special pieces for training of carers, hopwhaters, eaves and free ranges.

145,68 €
RE0592

Non-transitable flat cover, not ventilated, with gravel protection

Formation of non-transitable flat cover, not ventilated, with gravel, inverted type, pending 1% to 5%, composed of the following elements: Capa Regularization: Waterproofing cement mortar regularization layer of 2 cm thickness, cruminated and clean ; Waterproofing: Polibreal solution, or similar, consisting of the formation of a waterproofing membrane applied liquid and hot, based on Modified Betuns with polymers, and which forms an elastic coating totally adhered to support, according to DITE -07/0131 and It is composed of: 1. Polibreal® mastic layer, minimum thickness 3 mm and a consumption of 4 kg / m², 2. Placing internal sheet separator of smooth aluminum separator not less than 30 microns or external sheet of reinforcement of reinforcement of 50 microns polyester film, 3. Polibreal Mastic Layer, of minimum thickness 3 mm and a consumption of 4 kg / m², 4. Placement of external sheet reinforcement of 50 microns polyester film; Separator layer Under insulation: Placement of non-woven geotextile lamina composed of polyester fibers joined by Tiretes, (150 g / m²); Thermal insulation: 2 rigid panels of extruded polystyrene, smooth surface and side machining of medium miosa, 40 mm thick Each panel (total thickness: 80 mm), compression resistance> = 300 kpa, thermal resistance 1.2 m²K / W, thermal conductivity 0.034 W / (MK); Separator layer under protection: Non-woven geotextile placement composed of polyester fibers joined by Tiretes, (200 g / m²); Protection layer: 16 to 32 mm diameter pebble layer, exempt from it, extended with a thickness medium of 10 cm, and perimeter reinforcement of self-protected asphalt lamina according to norm. Even previous cleaning of support, rethinking, pitcher formation, sinks and other special elements with reinforcement bands and placed sheets adhered with a pre-printing blower, mining and hiking, according to DB HS-1 of the CTE and UNE-104 standards .

49,90 €
RE0377

Flat cover, transitable

Flat cover, transitable, conventional with fixed pavement with 0.8 mm thick EPDM sheet with welding between pieces and with high performance vapor-formation waterproofing, formed by thermal insulation formed by polystyrene panels Expanded EPS- 1i1 of 30 mm thick and k = 0.032 w / mo, separator layer of 0.50 mm polyethylene film of thickness that is floating on the thermal insulation with simple overlap, waterproofing by monolayer membrane not adhering to support Constituted by an ethylene lamina Propilè Diè Monomer EPDM of 1.5 mm thick, separating layer antiadherent - antipunzanant formed by polyester felt of 300 g / m² arranged floating on the waterproofing with simple overlapping and pavement of 20x10cm Catalan rajoleta 2.5 cm layer of mortar waterproofing cement, even previous cleaning of support, rethinking, pitcher formation, minvells, sinks and other special ements with reinforcement bands, Singles and riding. Measure in horizontal projection.

73,36 €
RE0069

Demolition Catalan cover of subtraction and desk walls, with pneumatic hammer.

Demolition of cover in Catalan, with subtraction and countertop walls of two tile threads, with pneumatic hammer, withdrawal of rubble and load on truck or container, without including transport to landfill.

15,37 €
RE0068

Dismantling Old curve tile with recovery. height <20 m

Disassembly of coverage of tile Old ceramic curve, and secondary elements, arranged in Channel and welcomes, with recovery of the dismounted pieces for possible reuse, even stacked instead that it is designated for this, selection, classification by sizes , classes and state of conservation, and cleaning, placed less than 20 m in height, even means of security, and elevation load and unloading, with removal of rubble for subsequent transport to landfill.

10,28 €
RE0375

Base training leveled in fiberrocement cover

Formation of flat surface on an existing inclined cover of wavy plates of fiberrocement, consisting of recurreas with thickness of medium thickness 6 cm lightened with armed arch, to create a flat base inclined, and waterproofing with an asphaltic lamina LBM-40 FP Auto protected mineral protected, Even formation of perimeter parapetas, dumping of lightened arlite and armed with mesh 31x31 mm steel 1,5 mm galvanized, auxiliary means, necessary scaffolds, withdrawal of excess material and total cleaning. Checked their tightness.

45,95 €
RE0058

Waterproofing covered with polyurethane paint, armed.

Non-destructive waterproofing of transitable flat covers, terraces or balconies made above the fixed pavement, through the application of two layers of elastic coating waterproofing based on liquid monocomponent polyurethane armed liquid with fabric of fiberglass and a layer of paint finish Elastoplastic protection resistant to ultraviolet rays, even cleaning and sanitation of the support prior to the placement of waterproofing.

20,53 €
RE0221

Waterproofing Transitable flat cover and paved tile.

Flat, transitable, conventional with fixed pavement and polyethylene pavement of 0.2 mm thickly over overlap for low-performance vapor barrier formation, formed by layer of thick cell concrete between 2 and 30 cm finished With a layer of regularization of 1.5 cm of cement mortar (1: 6) swirling, thermal insulation formed by polystyrene panels extruded XPS-IV of 30 mm thick and k = 0.028 W / MºC, separator layer for felt Fiberglass of 120 gr / m² willing floating on thermal insulation with simple overlap, waterproofing by membrane BICAPA PN-7 improved (UNE 104402/96) not adhered to support formed by two modified bitumen sheets together with each other in all Its surface, the bottom armed with fiberglass (LBM-40-FV) and the superior with polyester felt (LBM-40-FP), anti-adherent separating layer formed by polyethylene film of 0.50 mm thick disposed to floating re waterproofing with simp LE SOLABOURING AND PAVEMENT OF 20x10cm Catalan Rajoleta on 2.5 cm from waterproofing cement mortar, even previous cleaning of support, rethinking, perimeter edges, bibs, diplomas, sinks and other special elements with reinforcement bands , mines and ride. Measure in horizontal projection. The formation of slopes with lightweight concrete mixed with expanded clay (light arches for covers) is valued

73,84 €
RE0059u

Waterproofing of embroidering drainage in Terrassa

Repair of waterproofing vertical drainage in flat roof, consisting of: primer layer with 0.35 kg / m² of black bituminous emulsion type EB, two pieces of reinforcement of LBM-30-FP type sheet of 60 cm of 60 cm Wide the lower one and 80 cm the upper one, 30 gr / dm² and polyester felt armor, adhering to support, casseroleum and each other. The casserole will be located between the two bands of reinforcement and the membrane of the waterproofing of the cover above the two (not included).

18,85 €
RE0084m

Waterproofing of the coronation of the sill wall, width 15 cm.

Waterproofing of the coronation of the covered sill, constituted by: Asphalt primer with anionic bituminous emulsion EA type and bitumen lamina modified with elastomer SBS, type LBM (SBS) -30-FP, totally adhered to support with blower. For the waterproofing of the coronation of the wall, the raised one of the horse will be held and then placing the waterproofing will restore this (not included).

8,88 €
RE0023

Chopped from tile binding material

Demolition of cement mortar as tile union material on the roof, with manual media, even withdrawal of demolition and load on truck or container, without including transport to landfill.

4,70 €
RE0593

Protection and thermal insulation of flat cover practicable with filter slab

Protection and thermal insulation of flat cover Practicable, consisting of supply and placement of filter and insulating slab in one piece, of dimensions 50 cm x 50 cm and total thickness of 75 mm, formed by a layer of 35 mm concrete of Thickness and a thermal insulator of extruded polystyrene, thick 40 mm, density 35 kg / m³ and thermal conductivity XPS 0.034 W.

10,66 €
RE0376

Cover skirt repair

Cover skirt repair less than 20 meters away, in Canal and welcomes, with ceramic tile curved Arab type (1.70 kg / ut), artificially aged, 50x23x15 CRN, at the rate of 24-25 UT / m² and receiving with cement mortar 11-35m-2.5a (1: 8), one in 5 letters perpendicular to the eaves, or with ceramic flat tile for central zone, even rethinking, placement of tiles with corned corner on coca de mortar Starting with the eaves hnea, even cleaning and watered from the surface, according to NTE / QTT-11. Previously a plate of an undulin type under tile below the whole tile and on existing support.

79,52 €