Steel structure

CodeUDescriptionPrice
RE0017

Finished with synthetic enamel on steel carpentry, two-sided rails.

Synthetic glaze, black, gloss finish, surface of iron or steel, cleaning and preparation of the surface to paint, through manual methods until leaving it free of fats, finished with two hands with synthetic enamel with a minimum thickness of the 35 microns dry microns (performance: 0.08 l / m²)

16,55 €
RE0123u

Palette grants for structural recognition

Palette aids for the execution of verification tastings in structural recognition of existing building, consisting of 6 tastings of 10x10 cm on pillar and / or beams until reaching structural concrete, 1 basket based on foundation of 0.60x0 , 60x1.10 m deep to find the shoe, and 4 tastings of 0.40x0.40 approximately in false ceiling of housing to access the lower forged face, even replacement of the CATES to its initial state, Cover of regattas, replacement of coatings, well covered with compacted land filling, solera and similar paved, and vacuum covered in false ceiling with plasterboard and painted from its surface, even necessary buildings and auxiliary means, Runes withdrawal, excess material and final cleaning.

810,49 €
RE0133u

Placing anchor plate steel S-275-JR, 250x250x10 mm.

Supply and placement of anchor plate steel S-275-JR and dimensions 250x250x10 mm, with 4 holes of 14 mm, arranged on beam of reinforced concrete, drills and chemical anchor with epoxy resin type Save-Chem or similar, Galvanized rod Galvanized 12 mm, thread and flat washer, on regular basis with mortar of resins type applicatorCR4 or similar, anti-corrosive protection with thkrom paint or similar, and welded union of angular L100x100x10 mm as an element of support for Bigueta; Unit totally placed, a proportional parts and auxiliary means necessary, withdrawal of excess material and final cleaning.

42,63 €
RE0137m

Static stitch cracks in ceramic brick enclosures.

Static static sewing on ceramic brick factory through the inclusion of corrugated staples B 500 s of 10 mm in diameter and 30 cm in length, placed every 30 cm, crossing the fissure transversally, comprising: opening boxes ( as regatta) perpendicular to the direction of the fissure; Cleaned, wet and trough of these, received from the staples in boxes with cement mortar and slightly addictive lime, dosing 1: 0.5: 4, because there are no excessive retractions, placement of the staples and filling of The boxes to the level of the parament and the fissure already sewed with thixotropic mortar in injected pressure in controlled pressure.

29,22 €
RE0520u

Determination Speed ​​propagation Ultrasonic on pillars and beams (CU)

Determination of the speed of the propagation of ultrasonic impulses in pillars and beams (CU), according to UNE-83308/86 and UNE 83,308 / 93 ERR (HC-58) and 'Guide for Inspection and Supplementary Evaluation of Structures de Hormigón in existing buildings' of the Valencian Institute of Building IVE (DRB 05/09). Includes: displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work and issuance aids. It does not include: lifting means for heights over 7 m and replacement coatings.

13,92 €
RE0081m

Pilar 40x40 cm PNL-100.10 mm

Reinforcement of rectangular reinforcement reinforcement 40x40 cm for trellising confinement of 4 standardized hot laminated steel profiles S275 PNL-100.10 mm of 15 kg / m according to UNE 10025-2 arranged in the edges of the support and joins The four faces through metal welded metallic plates on situ, every 25 cm, by constriction by cooling, even contribution of welding material according to UNE-EN ISO 2560, worked and placed.

254,83 €
RE0086

Tiled Catalan Baldosí, in forged cantilever.

Supply and execution of facade pavement, by means of thick layer method, with Catalan tile of 12x24 cm, received with mortar of cement m-5 of 3 cm thick, moistened and sprinkled with the surface, rejunctive with cement bean In the minimum board, even proportional rethinking, cuts, training together and socket, elimination of excess material and final cleaning.

24,87 €
RE0215u

Reinforcement collar on the basis of Pilar de Concrete 25x25 cm, with PNL40.4

Base of reinforcement of pillar of reinforced concrete 25x25 or diameter 25 cm through collectives of metallic angular PNL-40.4 mm of steel S275 hot laminated, joined by welding, even welding in situ and filling of Space between concrete and steel with a layer of 1.5 mm epoxy resin in two components.

124,55 €
RE0216m

Metallic reinforcement of Pilar de Concrete 25x25 cm, with PNL40.4

Reinforcement of rectangular reinforcement reinforcement of dimensions 25x25 cm for confinamiemto of trellis of 4 standardized wet steel profiles S275 PNL-40.4 mm of 2.42 kg / m according to UNE 10025-2 arranged in the edges of the support and joins The four faces through metal welded metallic plates on situ, every 25 cm, by constriction by cooling, even contribution of welding material according to UNE-EN ISO 2560, worked and placed.

310,31 €
RE0135u

Supply and placing plate anchorage Herms

Supply and placement of Herms anchor plate, with 4 anchors of 12 mm, arranged on reinforced concrete beam, drills and chemical anchor with epoxy resin type Save-Chem or similar, Galvanized threaded rod 12 mm, thread and washer flat, on regular basis with mortar of resins type applicatecr4 or similar, anticorrosive protection with thkrom paint or similar; Unit totally placed, a proportional parts and auxiliary means necessary, withdrawal of excess material and final cleaning.

44,58 €
RE0588u

Treatment against xylophagous insects in wooden elements (1 ui)

Treatment against xylophagous insects in wood elements, with intervention in 1 inspection unit, consisting in:

984,68 €