Exterior carpentry

CodeUDescriptionPrice
RE0017

Finished with synthetic enamel on steel carpentry, two-sided rails.

Synthetic enamel, black color, gloss finish, surface of iron or steel, cleaning and preparation of the surface to paint, through manual methods until leaving it free of fats, finished with two hands with synthetic enamel with a minimum thickness of the 35 microns dry microns (performance: 0.08 l / m²)

16,55 €
RE0111u

Erected from exterior carpentry. up to 3 m².

Raised with glazed carpentry of any type located on the facade, with less than 3 m² of surface, with manual means, and manual cargo of rubble on truck or container.

19,74 €
RE0062u

Palette grants to interior carpentry raised up to 3 m²

Palette aids to elevated interior carpentry under 3 m², without recovery, even withdrawal of excess material and final cleaning, with container load for its transport to landfill.

22,10 €
RE0236u

Palette grants in Falcat of Exterior Carpenters <3 m²

Palette aids in falcado of exterior facade carpentry, dimensions <3 m², p.p. Auxiliary means, materials, rejunctured and finished, even withdrawal of excess material and final cleaning.

53,65 €
RE0120m

Demolition of ceramic spit width 25 cm.

Demolition of ceramic spitter Located between the vacuum jambs covering the stages, with manual means, without deteriorating the contiguous constructive elements. Even proportional part of cleaning, gathering, removal and manual cargo of rubble on truck or container.

9,13 €
RE0325m

Explanador Esclosador, 10x2 cm limestone, with breakage.

Capri or Almeria calcareous stone spitter training, from 110 to 150 cm in length, from 8 to 10 cm in width and 2 cm thick, with breakage, face and edge polished, with clear slope and embedded in the jambs , covering the settings, the departures of the parameters, the cornices of facade, etc., received with mortar of hydropho cement M-10. Even P / P of preparation and regularization of support with mortar mortar M-10, riddled between pieces and unions with walls with mortar of special boards for natural stone coatings.

16,08 €
RE0393m

Ceramic shop with breakage, in open balconies

Replacement of the first tile spinning of terraces to exterior facades, a piece that faces in front of forged, pre-chopped and raised of the first ceramic tile and its mortar of union, placing new piece prefabricated with breakage , of dimensions 30x25 cm, taken with flexible mortar, PP of cuts and junctures in meeting with the metallic mounting of the railings; Fixed pieces, finished, removal of ruins and final cleaning; Fully finished.

30,94 €
RE0235m

10x2 cm calcareous stone spitter, with breakage.

Formation of Capri limestone Capri or similar, from 110 to 150 cm in length, from 8 to 10 cm in width and 2 cm thick, with trencaaaaas, face and edge polished, with clear slope and embedded in the jambs, Covering the sills, the departments of the parameters, the facade cornices, etc., received with mortar of hydrophift cement M-10. Even P / P of preparation and regularization of support with mortar mortar M-10, riddled between pieces and unions with walls with mortar of special boards for natural stone coatings.

16,08 €
RE0119m

Capri Calcary Stone Capri Spitting Capri.

Formation of Capri calcareous spitter, from 110 to 150 cm in length, from 21 to 25 cm wide and 2 cm thick, with trornaaaas, face and edge polished, with clear slope and embedded in the jambs, covering the Settings, departments of the parameters, facade cornices, etc., received with mortar of hydrophift cement M-10. Even proportional part of preparation and regularization of support with mortar of hydrophift cement M-10, riddled between pieces and unions with walls with mortar of special boards for natural stone coatings.

25,89 €
RE0115m

Goteron formation in forged front.

Training formation in front of sloping forged, by opening of ljegitudinal rubbing with electric radial, prior rethinking and marking, finished, removal of excess material and cleaning.

5,17 €
RE0098u

Aluminum exterior carpentry 2 sliding leaves 100x115 cm, with PVC blinds.

Supply and assembly of aluminum carpentry, white lacquer, with 60 microns of minimum thickness of dry film, for aluminum window shaped, simple sliding, 100x115 cm, basic series, formed by two leaves, and without Base construction Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Compact incorporated (monoblock), rolling blinds of PVC lamellas, with manual drive through ribbon and collector, equipped with all accessories. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water sealing according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

333,30 €
RE0097u

Aluminum exterior carpentry 2 sliding leaves 115x120 cm, with PVC blinds.

Supply and assembly of aluminum carpentry, lacquered white, with 60 microns of minimum thick film, for aluminum window shaped, simple sliding, 115x120 cm, basic series, formed by two leaves, and without Base construction Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Compact incorporated (monoblock), rolling blinds of PVC lamellas, with manual drive through ribbon and collector, equipped with all accessories. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water sealing according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

345,10 €
RE0096u

Aluminum exterior carpentry 2 sliding leaves 130 x 135 cm, with PVC blinds.

Supply and assembly of aluminum carpentry, lacquered white, with 60 microns of minimum thick film, per aluminum window forming, simple sliding, 130x135 cm, basic series, formed by two leaves, and without Base construction Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Compact incorporated (monoblock), rolling blinds of PVC lamellas, with manual drive through ribbon and collector, equipped with all accessories. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water sealing according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

384,69 €
RE0093u

Aluminum exterior carpentry 2 sliding leaves 140x140 cm, with PVC blinds.

Supply and assembly of aluminum carpentry, lacquered white color, with 60 microns of minimum thick film, for aluminum window forming, simple sliding, 140x140 cm, basic series, formed by two leaves, and without Base construction Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Compact incorporated (monoblock), rolling blinds of PVC lamellas, with manual drive through ribbon and collector, equipped with all accessories. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water sealing according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

398,78 €
RE0099u

Aluminum exterior carpentry 2 sliding leaves 80x85 cm, without blindness.

Supply and assembly of aluminum carpentry, white lacquer, with 60 microns of minimum thickness of dried film, for aluminum window shaped, simple sliding, 80x85 cm, basic series, formed by two leaves, and with Base construction Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water sealing according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

228,91 €
RE0237u

CEGA door, noble wood melamine, 203x82.5x3.5 cm.

Blind door, from a 203x82.5x3.5 cm leaf, from fiber board with noble melamine, with alveolar soul of Kraft paper; Pine base construction 90x35 mm; MDF Gales, with 90x20 mm noble melamine coating; MDF tapas, with coating of 70x10 mm noble melamine; With hung and fence tools.

206,36 €
RE0118u

Receipt of exterior carpentry. Up to 3 m².

Placement and fixation of exterior carpentry of up to 2 m² of surface, by receiving the parament of the anchor pins with mortar of hydrophift cement M-5.

48,34 €
RE0100u

Enclosures, 2 sliding leaves Balcony 1300x2450 mm., Without blindness.

Supply and assembly of aluminum carpentry, lacquered white, with 60 microns of minimum thickness of dry film, for aluminum window shaped, simple sliding, 1.30 x 2.45 cm, basic series, formed by two leaves, and with basic construction. Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water sealing according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

444,70 €
RE0262m

Trencaaaigas on tops, with ceramic piece with Trencaaaaaigua

Escopidor made with ceramic pieces with breakage, 24x14 cm, dams with M-5 cement mortar, even rejoiced with colored cement, removal of remains and cleaning.

20,10 €
RE0259m

Breakigoas on sill, ceramic piece with breakage

Escopidor made with ceramic pieces with breakage, 24x14cm, dams with M-5 cement mortar, even jacked with a colored cement, removal of remains and cleaning.

23,48 €