Quality control

CodeUDescriptionPrice
RE0123u

Palette grants for structural recognition

Palette aids for the execution of checking tasting in structural recognition of existing building, consisting of 6 tastings of 10x10 cm on pillar and / or beams until reaching structural concrete, 1 based on 0.60x0 foundation , 60x1.10 m deep to find the shoe, and 4 tastings of 0.40x0.40 approximately in false ceiling of housing to access the lower forged face, even replacement of the CATES to its initial state, Cover of regattas, replacement of coatings, well-covered with compacted land filling, solera and similar paved, and vacuum cover in false ceiling with plasterboard and painted from its surface, even necessary buildings and auxiliary means, Runes withdrawal, excess material and final cleaning.

810,49 €
RE0536u

Structural and material characterization in a pillar, beam or forged with Radar PS 1000 technology

Structural and material characterization in a pillar, beam or forged with Radar PS 1000 technology consisting of documentation of external dimensions and prior cracking, scanned with radar PS 1000 non-invasive technology for the detection of the position of the armor, thickness of the coating, Number of bars and separation of rings, diameter of armor. Includes: visits and displacement, auxiliary means, protection of furniture, preparation and work grants, graphic and photographic documentation, replacement of elements eliminated and issuance of ACTA. It does not include: auxiliary means for heights greater than 7 m or replenishment of coatings.

114,12 €
RE0531u

Determination of resistance to booting at anchor cutting

Determination of the resistance to starting chemical anchor cutting for threaded rod Ø 12 mm and length 80 mm with high performance synthetic resin, in accordance with UNE standard in 1537, consisting of execution of destructive test resistance At traction with calibrated hydraulic equipment, registration of deformations and cracking load. Includes: displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work grants, anchorage placement strictly following the recommendations of the manufacturer, graphic and photographic documentation of the essay and emission of ACTA. It does not include: elevation means for heights over 7 m or replenishment of coatings.

112,22 €
RE0530u

Determination of resistance to anchoring traction boot

Determination of resistance to boot at chemical anchor traction for threaded rod Ø 12 mm and length 80 mm with high performance synthetic resin, according to UNE standard in 1537, consisting of execution of resistance destructive test At traction with calibrated hydraulic equipment, registration of deformations and cracking load. Includes: displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work grants, anchorage placement strictly following the recommendations of the manufacturer, graphic and photographic documentation of the essay and emission of ACTA. It does not include: elevation means for heights over 7 m or replenishment of coatings.

107,22 €
RE0521u

Study of correlation between testimonies of concrete and ultrasounds

Study of the correlation between resistance of testimonies of concrete and ultrasonic speed, on pillars and beams.

157,50 €
RE0394u

Sealing service test on deck

Test of service for partial checking of the cover area of ​​cover up to 100 m² of surface area, executed by laboratory accredited, by means of flood for at least 8 hours and simulation of rain with continuous irrigation for 75 minutes in non-flood areas, using system of linear sprinkler, according to DRC-09, even grants (sealing of sink, auxiliary installation for flood of cover, hose, flowmeter, etc.), inspection and verification for laboratory technician in housing during the flood for Progressively check the watertight in Cazole-Embornal-Board with forged-cover and subsequent issuance of a record of results.

387,45 €