Inspection coves

CodeUDescriptionPrice
RE0122u

Palette grants for the execution of coves (2 ui)

Palette aid for the execution and replacement of coves in a building with 2 inspection units, consisting of the execution replacement and painting of the coating in the affected area, of dimensions not greater than 0.50x0.50 m, without Contribution of finishing materials. It includes: displacement of personnel and equipment, auxiliary means, prior protection of the work area and withdrawal of rubble and cleaning. It does not include: auxiliary means for heights greater than 7 m, or prior preparation of the tasting (chopped coatings, opening of gaps in false ceilings, etc.) or replacement coatings and finishes.

232,55 €
RE0019u

Inspection cove in pillar or reinforced concrete beam.

Inspection cove on pillar or reinforced concrete beam to verify the state of the armor, consisting of a maximum of three coves, to be determined by technician, visual inspection and determination of geometry, aspect of concrete , thickness of the coating, depth of carbonation, resistance to chopping, inter-intereix, barns and diameter of the armor and degree of oxidation and loss of section of the armor, in accordance with the 'Guide for to the Inspection and Complementary Evaluation of Concrete Structures in existing buildings' of the Valencian Institute of Building IVE (DRB 05/09). Includes: displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work grants, removal of ruins and cargo up to container or truck, graphic and photographic documentation of the cove, replacement with structural mortar and emission of ACTA. It does not include: auxiliary means for heights exceeding 7 m, replacement of coatings, manual media, replacement of concrete or transport to landfill.

176,03 €
RE0528u

Determination of geometry and composition of building cover (CC)

Determination of geometry and composition of building cover (CC), consisting of cove from the outside for visual inspection, determination of the total and partial composition and dimensions of the cover and characterization of encounters with bonus and sables, D 'Agreement with the' Guide for Inspection and Complementary Evaluation of structures of Hormigon in existing buildings' of the Valencian Institute of Building IVE (DRB 05/09). It includes: displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work grants, graphic and photographic documentation of the cove, replacement of elements eliminated and issuance of ACTA. It does not include: auxiliary means for heights greater than 7 m or replenishment of coatings.

154,63 €
RE0527u

Determination of geometry and composition of facade of building (CF)

Determination of geometry and composition of building facade (CF), consisting of cove from the interior for visual inspection, determination of the total and partial composition and dimensions of the closure, in accordance with the 'Guide for Inspection Y Supplementary evaluation of structures of hormigon in existing buildings' of the Valencian Institute of Building IVE (DRB 05/09). It includes: displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work grants, graphic and photographic documentation of the cove, replacement of elements eliminated and issuance of ACTA. It does not include: auxiliary means for heights greater than 7 m or replenishment of coatings.

154,63 €
RE0525u

Determination of the geometry of a forged (CG)

Determination of the geometry of a forged (CG), consisting of cove, visual inspection and determination of type of beam and corner, edge of the forged, thickness of the layer of compression, inter-intervening and encounters Biga-beam. Includes: preparation and workgrades, graphic and photographic documentation of the cove and replacement, in accordance with the 'Guide for Inspection and Complementary Evaluation of structures of Hormigón in existing buildings' of the Valencian Institute of Building IVE (DRB 05/09). It includes: displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work grants, graphic and photographic documentation of the cove and emission of ACTA. It does not include: auxiliary means for heights greater than 7 m or replenishment of coatings.

118,46 €
RE0526u

Determination of the geometry of a foundation shoe (CS)

Determination of the geometry of a shoe of foundations (CS), consisting of cove up to 1.75 m depth with respect to solad, visual inspection of the strata of the land and the state of conservation of the foundation, extraction and conservation of sample Unalterated land in support level, determination of shoe and riot dimensions and depth of the firm and determination of the characteristics of the sample extracted from the ground, in accordance with the 'Guide for inspection and complementary assessment of structures of hormigón in building Existentes' of the Valencian Institute of VIU BUILDING (DRB 05/09). Includes: Displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work grants, cut of solera up to 15 cm thick with radial, minced from the solera and excavation, removal and transport of rubble, graphic documentation and photographic of the cove, replacement of the excavation with own lands, base replacement and solera and emission of minutes. Does not include: replenishment of coatings.

357,74 €
RE0524u

Determination of section and armor in Pilar or Beam (CA)

Determination of section of pillar or beam and its state of conservation (CA), consisting of documentation of prior cracking, prior detection of the position of the armor, execution of two regattas (in center and end of the pillar or beam) on two sides Contiguous, visual inspection and determination of geometry, aspect of concrete, thickness of the coating, depth of carbonation, number of bars and separation of rings, diameter and steel type of armor and degree of oxidation and loss of section Of the armor, in accordance with the 'Guide for Inspection and Complementary Evaluation of structures of Hormigon in existing buildings' of the Valencian Institute of Building IVE (DRB 05/09). Includes: displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work grants, graphic and photographic documentation of the cove, replacement with structural mortar and Emission of ACTA. It does not include: auxiliary means for heights greater than 7 m or replenishment of coatings.

69,20 €
RE0523u

Determination Section of Biga and its Conservation State (CV)

Determination of the section of a BUGIETA and its state of conservation (CV), consisting of prior cracking documentation, chopped cove in the lower wing, visual inspection and determination of geometry, aspect of concrete, thickness of coating, Depth of carbonation, resistance to chopped, interix, number of bars and diameter of the armor and degree of oxidation and loss of section of the armor, in accordance with the 'Guide for inspection and complementary assessment of structures of hormigón In existing buildings' from the Valencian Institute of VIU (DRB 05/09). Includes: displacement of personnel and equipment, auxiliary means, protection of furniture, preparation and work grants, graphic and photographic documentation of the cove, replacement with structural mortar and Emission of ACTA. It does not include: auxiliary means for heights greater than 7 m or replenishment of coatings.

52,12 €
RE0018u

Wrought inspection tasting, with false ceiling.

Tasting inspection of lower face of forged at a height of up to 3.00 m with retreating the false ceiling by manual means, without including the replacement of them. In an area of ​​1 m².

30,22 €
RE0217u

Tasting of inspection in a lower face Break forged. Aluminosis.

Tasting 1 m² ceiling and sample extraction of prestended or armed beam concrete, thus eliminating the plaster of plaster in the lower face of the beam in a length of at least 40 cm, extraction of the sample of no less 200 gr deepening to be able to see the armor and check its state, through manual methods, without including the necessary repair.

16,66 €
RE0015u

Inspection tasting in foundation.

Tasting of 80 cm deep, for foundation inspection, which includes the demolition of the pavement, the solera and excavation of the terrain with manual and mechanical means and manual load for subsequent filling, extended and compacted with own land.

315,32 €
RE0014u

Inspection tasting in plaster coating.

Inspection tasting in plaster coating, at a height of up to 3.00 m, for the inspection of the different layers and type of base material, with manual means, without including the replacement of them.

30,38 €
RE0136u

Tasting Inspection in Armor of Pilar

Taste inspection in pillar of reinforced concrete up to 3.00 m in height to verify the state of the armor, by means of manual methods, without including the replacement of the elements, with removal of ruins and load in container or truck , without including landfill transport

46,58 €