Facings

CODEUDESCRIPTIONPRICE
RE0063m

Built in stone cladding stepped ladder.

Lifted coating stone steps, with jackhammer with debris removal and loading truck or container, without transport to landfill.

6,61 €
RE0050

Plastering cement mortar base, mestrejat.

Training facades and interior walls, a base layer of 15 mm thick for coating continuous double layer with batter evened mortar cement gray, made of cement, selected aggregates and additives, finishing swirls, impervious to the rainwater. Manually applied on a surface of ceramic brick, concrete block or brick or block thermoclay. Even proportion of surface preparation support, placing fiberglass mesh for reinforcement antiàlcalis meetings between different materials in the fronts of forged 20% of the surface of furniture, training together corners, teachers, edges, teeth, jambs, lintels, finishes in encounters with walls, paneling or other receipts on its surface.

18,79 €
RE0049

Plastering base with cement mortar good view.

Training facades and interior walls, a base layer of 15 mm thick for coating continuous double layer with plaster to good sight cement mortar, gray, made of cement, selected aggregates and additives, finishing swirls, waterproof the rainwater. Manually applied on a surface of ceramic brick, concrete block or brick or block thermoclay. Even proportion of surface preparation support, placing fiberglass mesh for reinforcement antiàlcalis meetings between different materials in the fronts of forged 20% of the surface of furniture, training together corners, teachers, edges, teeth, jambs, lintels, finishes in encounters with walls, paneling or other receipts on its surface.

13,41 €
RE0210

Evened plastered with cement mortar.

Lining interior walls and exterior with plaster evened mortar industry for plastering, 15 mm thick, gray, smooth finish for the completion of the base layer coated continuous double-layer finish swirls, thickness 15 mm, applied manually, reinforced and reinforced with mesh antiàlcalis changes in material and forged fronts.

36,03 €
RE0040

Demolition of factory coated interior partition, 4/5/7 cm thick.

Demolition of factory coated interior partition, consisting of simple hollow brick from 4 to 7 cm thick, with manual means, without affecting the stability of the adjacent building elements. Even demolition proportion of its coatings (plaster, mortar, tiles, etc.), carpentry and recessed installations, following the dismantling of the leaves; cleaning, gathering, removal and manual loading debris truck or container.

5,26 €
RE0042

Demolition of interior partition factory coated, solid brick 5 cm panderete.

Demolition of factory coated interior partition, formed by a massive brick panderete 5 cm thick, with manual means, without affecting the stability of the adjacent building elements. Even demolition proportion of its coatings (plaster, mortar, tiles, etc.), carpentry and recessed installations, following the dismantling of the leaves; cleaning, gathering, removal and manual loading debris truck or container.

6,76 €
RE0041

Demolition of interior partition factory coated, perforated brick 11 cm thick.

Demolition of factory coated interior partition, formed by perforated brick thickness of 11-12 cm, with manual means, without affecting the stability of the adjacent building elements. Even demolition proportion of its coatings (plaster, mortar, tiles, etc.), carpentry and recessed installations, following the dismantling of the leaves; cleaning, gathering, removal and manual loading debris truck or container.

9,32 €
RE0164u

Waste Management Study for rehabilitation cranes (10 IU)

Writing Study Waste Management for the works described in the implementation plan of rehabilitation intervention cranes 10 inspection units, according to the provisions of Royal Decree 105/2008, February 1, 2008, the Ministry of the Presidency, which regulates the production and management of construction and demolition waste.

263,67 €
RE0079

Microfiber mesh protection vertical work

Supply, installation and dismantling mesh protection in vertical work, consisting of dense microfiber mesh density even fasteners and anchors fixed points. Not including daily rental.

3,23 €
RE0107u

Assembling and dismantling shelter for pedestrians. Section 15 ml.

Erection and dismantling of structures of protection for pedestrians, with free passage 1.5 meters wide and 3.0 meters high, consisting of tubular hot galvanized steel with higher ceiling protection of pedestrians and peaked at 45 ° angle to avoid falling objects, ready for installation after a scaffolding at heights as a basis for the execution of facade of 15 m, according assembly drawings. Even accessories, security systems, anchors and replacements.

550,17 €
RE0212

Chopped coating plastering.

Chopped plaster coating applied on vertical surface up to 3 m high with electric hammer, eliminating it completely without damaging the surface that will support the open and prepared for subsequent coating. Even proportion of cleaning, gathering, removal and manual loading debris truck or container.

8,27 €
RE0211

Perforated cladding layer rendering.

Chopped monolayer mortar applied interior vertical surface up to 3 m high with electric hammer, eliminating it completely without damaging the surface that will support the open and prepared for subsequent coating. Even proportion of cleaning, gathering, removal and manual loading debris truck or container.

9,83 €
RE0108

Acrylic plastic paint on exterior walls. Facades.

Coating of facades with decorative plastic paint for the realization of the topcoat continuous double layer coatings; cleaning and scrubbing prior mortar support industrial background and hand finishing both hands (yield: 0.1 l / m² each hand), as well as treatment for the presence of mold or moisture at 10% of its surface.

9,96 €
RE0398u

Protection of interior furnishings

Protection of furniture inside a house or premises prior to intervention work by its cover with transparent polyethylene sheet and dismounted elements susceptible to breakage as mirrors, etc.

85,77 €
RE0487u

Privacy passive RF-90 Rock wool.

Passive fire protection of all metallic elements arranged in the project. Both reinforcements existing profiles IPE beams under as UPN conforming the beam as well as new profiles reinforcement system Mecanoviga worth measuring. Made by projecting mortar fire retardant rock wool for metal structures for achieving RF-90.

23,11 €
RE0222u

Prosthesis wooden frames fiberglass.

Repair deteriorated area eliminating the beam and placing a prosthetic meteixa section of the existing beam up to 30 cm of sawn pine (Pinus sylvestris), brushed finish for structural applications, structural quality MEG as UNE 56544, resistant class C-18 according to UNE-EN 338 and UNE-EN 1912 and protect against biotic agents that corresponds to the kind of penetration NP2 (3 mm on the sides of the sapwood) according to UNE-EN 351 -1, attached to healthy wood with epoxy-acrylate, styrene-free, and then arming the union of two wood sticks with two fiberglass reinforced polyester resin, 12 mm in diameter, 0 , 05 meters long each, housed in holes made in the prosthesis and healthy wood. Even proportion of healthy piece of wood, cut at 60 ° to healthy wood to receive the prosthesis, fixing provisional prosthesis jacks and wooden nails, execution of drilling in the prosthesis and wood healthy epoxy resin poured into the perforations after placing the rods, polished imperfections, cleaning, collection, removal and manual loading rubbish truck or container.

102,07 €
RE0245m

Scratching coating must vigueta existing wooden surface.

Scratching coating should existing wooden surface with manual means using scraper and spatula, and after polishing the surface with mechanical means, by scrubbing with barbed metal disc. Even w / w of cleaning, collection, removal and manual loading remains on truck or container.

7,71 €
RE0173u

Drafting building rehabilitation project (1 UI)

Writing rehabilitation project execution for the first inspection unit, consisting of drafting and assessment of the supplementary report from the building, study and assessment of the coves executed (if any) and description of the solution repair of pathologies detected in structure, roofing, façades and facilities. Includes tours and travel, visit expert for inspection of the property, the report document specification, budget and plans.

2.927,74 €
RE0171u

Drafting building rehabilitation project (10 IU)

Writing implementation plan for building restoration or local inspection with 10 units, consisting of drafting and assessment of the supplementary report from the building, study and assessment of the coves executed (if any) and description of the solution for the repair of pathologies detected in structure, roofing, façades and facilities. Includes tours and travel, visit expert for inspection of the property, the report document specification, budget and plans (with an intensity of inspection least 10 IU).

5.047,17 €
RE0172u

Drafting building rehabilitation project (20 IU)

Writing implementation plan for a building renovation or 20 local inspection units, consisting of drafting and assessment of the supplementary report from the building, study and assessment of the coves executed (if any) and description of the solution for the repair of pathologies detected in structure, roofing, façades and facilities. Includes tours and travel, visit expert for inspection of the property, the report document specification, budget and plans (with an intensity of inspection least 20 IU).

6.156,96 €
RE0168u

Drafting building rehabilitation project (50 IU)

Writing implementation plan for a building renovation or 50 local inspection units, consisting of drafting and assessment of the supplementary report from the building, study and assessment of the coves executed (if any) and description of the solution for the repair of pathologies detected in structure, roofing, façades and facilities. Includes tours and travel, visit expert for inspection of the property, the report document specification, budget and plans (with an intensity of inspection least 30 IU).

8.201,33 €
RE0008m

Reinforcing wrought IPE-100 to 3.50 m. Includes preliminary work and shoring.

Functional replacement of slabs, in areas identified in plans, each consisting of reinforcing beam profiles using IPE-100 S-275-JR, according to the description of the Project and the Project Management indications, including the following materials and works:

94,35 €
RE0009m

Reinforcing wrought IPE-120 to 3.5 m. Includes preliminary work and shoring.

Functional replacement of slabs, in areas identified in plans, each consisting of reinforcing beam profiles using IPE-120 S-275-JR, according to the description of the Project and the Project Management indicacionsde, including the following materials and work:

99,64 €
RE0010m

Reinforcing wrought IPE-140 up to 4 m. Includes preliminary work and shoring.

Functional replacement of slabs, each consisting of reinforcing beam profiles using IPE-140 S-275-JR, including the following materials and works:

105,16 €
RE0011m

Reinforcing wrought IPE-160 to 3.5 m. Includes preliminary work and shoring.

Functional replacement of slabs, in areas identified in plans, each consisting of reinforcing beam profiles using IPE-160 S-275-JR, according to the description of the Project and the Project Management indicacionsde, including the following materials and work:

112,60 €
RE0250u

Repair Cabot beam wooden frames with carbon fiber.

Repair any wooden beam, cutting the area damaged or degraded by the solid-dumping gravity of 30 kg mortar fluid two-component epoxy resin base, upon placement of the armor 4 bars carbon fiber embedded in an epoxy matrix, MB Construction Chemical- -BASF 165/2500 of 8 mm diameter and 800 mm in length each, anchored in the beam with epoxy resin, styrene-free, high-resistance, applied filter dosing and mixing machine in holes made in the healthy part of the wood. Even w / w mounting system formwork in the area to intervene, placing protective film of polyethylene, sealing the formwork to prevent leaks, cleaning and priming of wood with epoxy grout mortar of the same, the dismantling formwork system, gathering, removal and manual loading debris truck or container.

472,31 €
RE0310m

Structural repair of concrete in front of forged 35 cm.

Repairing front forged in balconies and terraces with removal of the entire coating was deficient by mechanical or manual to get at least reinforced steel oxidation causes the peeling. It will clean out this armor oxide in its entirety and contour by sandblasting or brush fence, for subsequent passivation using an appropriate pasivante types SIKA TOP 108 or similar, in two layers and regeneration , to reconstruct the original form of the piece to repair with a mortar or similar type Monotop 650 prior surface treatment of existing concrete type latex emulsion adhesion. If you need to have reached an excessive degree of oxidation, will be replacing the frames needed for other similar features at least, even loading and transport of debris to landfill authorized.

36,00 €
RE0116m

Repair or replacement parts ceramic socket.

Repair or replacement of ceramic piece socket type messed finished in perimeter roof, perforated piece of mortar binding, layout similar piece taken with cement mortar 1: 6, final cleaning and grouting works.

8,31 €
RE0064m

Repair occasional song wrought lining, width 35 cm.

Healthy singing and repair 35 cm wide wrought seen in forward and rear main access to housing, chopped previous coating cracked or damaged, healthy structural concrete structural passive armor and reconstruction of the affected section mortar AplicatecR4 resin type or similar reconstruction of edges and surface finish plastering cement mortar 1: 6 good view, final application of coating silicate paint in shades similar to the existing one, including auxiliary, scaffolding needed , removal of excess material and cleaning.

39,53 €
RE0207m

Coating step natural stone Crema Levante.

Supply and installation of siding with straight step on scale of 100 cm wide, by assembling the following elements: Crema Levante extended marble, polished finish and cream marble front Levante 3 and polished finish 2 cm thick respectively, face and polished edges, received all with cement mortar M-5, placed on a stepped before (not included in the price). Even grouting cement mortar joints, CG1 for meeting minimum (between 1.5 and 3 mm), with the same tone of the pieces.

72,15 €
RE0002

Silicate paint coating exterior

Decorative coating facade paint silicate, for the realization of the topcoat coatings continuous double layer; cleaning and scrubbing prior support in good condition, thanks to funds with a potassium silicate prepared with both hands and acrylic emulsions and finishing (yield: 0.167 l / m² each hand).

11,10 €
RE0226

Monolayer coating for facades, pillars and forged ahead

Training facades continuous coating 20mm thick, impermeable to rainwater, monolayer mortar for waterproofing and decoration of facades, scraped finish, color white, made of cement, additives, synthetic resins and mineral fillers with placing fiberglass mesh antiàlcalis the center of the thickness of the mortar to build it and strengthen it. Manually applied on a surface of ceramic brick, concrete block or brick or block thermoclay, upon application of a layer of waterproof mortar, 10 mm thick, made of cement, selected aggregates and additives, in places where s' appreciate deficiencies flatness or adhesion (25% of the surface of the household). Even w / w of surface preparation support, placing fiberglass mesh for reinforcement antiàlcalis meetings between different materials in the fronts of forged 20% of the surface of furniture, training joints, corners, teachers, edges, teeth, jambs, lintels, finishes in encounters with walls, paneling or other receipts on its surface, and / assembling, dismantling and rental of scaffolding approved.

27,65 €
RE0390

Monolayer coating on railings and wrought fronts.

Training facades continuous coating 20mm thick, impermeable to rainwater, monolayer mortar for waterproofing and decoration of facades, scraped finish, color similar to the existing one, made of cement, additives and synthetic resins mineral fillers, with placement of mesh fiberglass antiàlcalis the center of the thickness of the mortar to build it and strengthen it. Manually applied on a surface of ceramic brick, concrete block or brick or block thermoclay, upon application of a layer of waterproof mortar, 10 mm thick, made of cement, selected aggregates and additives, in places where s' appreciate deficiencies flatness or adhesion (25% of the surface of the household). Even w / w of surface preparation support, placing fiberglass mesh for reinforcement antiàlcalis meetings between different materials in the fronts of forged 20% of the surface of furniture, training joints, corners, teachers, edges, teeth, jambs, lintels, finishes in encounters with walls, paneling or other receipts on its surface, and / assembling, dismantling and rental of scaffolding approved.

32,57 €
RE0381

Promastic fiber coating for finish rolling.

Application of bituminous putty FIBER PROMASTIC up to a thickness of 2 mm, after cleaning the support, aspirate residual dust, hand primer Imprimul diluted with 20%, and finished with two hands Promastic, average yield 2- 2.5 kg / m² and layer, according to the manufacturer's instructions.

19,67 €
RE0218

Cleaned floors of small beams and structural repair.

Intervention in concrete beam consisting of: chopped roof lining wetlands to achieve joists, healthy cepilladora armor with manual handling of frames affected by oxidation product using passive beam reconstruction using special mortars or sika similar

34,11 €
RE0114

Healthy sill lining on terraces. sup 30%.

Sanitized lining the parapets of terrace, consisting of chopped specific areas shabby and reconstruction dosing cement mortar 1: 6 even removal of excess material and cleaning.

15,81 €
RE0121

System Thermocal DBBLOK thermal insulation of facades and mineral coating.

Rehabilitation energy front, using thermal and mineral coating of facades for its outer face with Thermocal DBBLOK system, consisting of a layer of mortar plastered thermal and acoustic insulation, Thermocal, 20 mm thick, applied by projection mechanical performance of 15 kg / m², and a layer of lime mortar monolayer, Ibercal 450 Thermo Master, finished swirls, color to choose, 10 mm thick.

32,07 €
RE0014u

Tasting inspection plaster coating.

Tasting inspection plaster coating, up to a height of 3.00 m, for the inspection of different layers and types of base material with manual means, excluding the replacement thereof.

30,38 €