Floors

CodeUDescriptionPrice
RE0063m

Raised Petri coating in staggered scale.

Raised from the Petri coating of steps, with pneumatic hammer, withdrawal and loading of rubble on truck or container, and without transport to landfill.

6,61 €
RE0050

Breaked cement mortar base, master.

Training on facades and interior walls, of base layer of 15 mm thick, for continuous double layer coatings, with plastering of cement mortar, gray, cement composite, selected aggregates and additives, end-up, waterproof finish 'rain water. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block. Even proportional part of preparation of the surface support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, training of boards , corners, masters, edges, grinding, branches, lintels, finishes in meetings with walls, coatings or other elements received on their surface.

18,79 €
RE0049

Base buzzer, with cement mortar in good view.

Formation on facades and interior walls, of 15 mm thick layer, for continuous double layer coatings, with plastering in good view of cement mortar, gray, cement composed, selected aggregates and additives, endewly finished, waterproof to rainwater. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block. Even proportional part of preparation of the surface support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, training of boards , corners, masters, edges, grinding, branches, lintels, finishes in meetings with walls, coatings or other elements received on their surface.

13,41 €
RE0210

Breakdown, with cement mortar.

Coating of interior and exterior paraments with plastering of industrial mortar for plastering, 15 mm thick, gray, smooth finish, for the realization of the base layer with continuous double layer coatings, finished lirred, thickness 15 mm, Applied manually, armed and reinforced with anti-mesh in the material changes and in the forged fronts.

26,70 €
RE0040

Demolition of internal partition factory coated, thick 4/5/7 cm.

Demolition of interior partition factory coated, formed by simple vacuum brick of 4 to 7 cm thick, with manual means, without affecting the stability of the contiguous constructive elements. Even proportional part of demolition of its coatings (plaster, mortar, tiled, etc.), embedded facilities and carpentry, prior disassembly of the leaves; Cleaning, gathering, withdrawal and manual load of rubble on truck or container.

5,26 €
RE0042

Demolition of interior partition factory coated, 5 cm massive brick in Panderete.

Demolition of interior partition factory coated, formed by massive brick in Panderete of 5 cm thick, with manual media, without affecting the stability of the contiguous constructive elements. Even proportional part of demolition of its coatings (plaster, mortar, tiled, etc.), embedded facilities and carpentry, prior disassembly of the leaves; Cleaning, gathering, withdrawal and manual load of rubble on truck or container.

6,76 €
RE0041

Demolition of interior partition factory coated, perforated brick Thickness 11 cm.

Demolition of interior partition factory coated, formed by perforated brick of 11/12 cm thick, with manual means, without affecting the stability of the contiguous constructive elements. Even proportional part of demolition of its coatings (plaster, mortar, tiled, etc.), embedded facilities and carpentry, prior disassembly of the leaves; Cleaning, gathering, withdrawal and manual load of rubble on truck or container.

9,32 €
RE0079

Microfiber mesh, Protection Vertical Works

Supply, placement and disassembly of protection mesh in vertical work, consisting of high density microfiber microfiber, even fixations and anchors to fixed points. Not including daily rent.

3,23 €
RE0107u

Assembly and dismantling of canopy for pedestrian crossing. Tram 15 ml.

Assembly and disassembly of pedestrian crossing protection structure, with free step of 1.5 m wide and 3.0 m high, formed by tubular structure of hot galvanized steel, with upper ceiling for To pedestrian protection, and visor at an angle of 45 ° to avoid falling objects, prepared for the subsequent placement of an enactment in height that will serve as the basis for the execution of facade of 15 m, seconds Mounting plans. Even accessories, protection systems, anchors and replacements.

550,17 €
RE0212

Chopped coating plastered with plaster.

Chopped plaster coating applied on vertical parament of up to 3 m in height, with electric hammer, eliminating it totally without deteriorating the surface support that will be uncovered and prepared for its subsequent coating. Even proportional part of cleaning, gathering, removal and manual cargo of rubble on truck or container.

8,27 €
RE0211

Chopped coating Monolayer mortar.

Chopped monolayer mortar applied on internal vertical parament of up to 3 m in height, with electric hammer, eliminating it totally without deteriorating the surface support that will be revealed and prepared for its subsequent coating. Even proportional part of cleaning, gathering, removal and manual cargo of rubble on truck or container.

9,83 €
RE0108

Acrylic plastic paint on exterior walls. Facades

Decorative coating facades with smooth plastic paint, for the realization of the finishing layer in continuous double layer coatings; Previous cleaning and rubbing of industrial mortar support, background hand and two finishing hands (performance: 0.1 l / m² each hand), as well as treatment against the presence of mold or humidity in 10% of its Surface

9,96 €
RE0398u

Protection of interior furniture

Protection of the interior furniture of a house or place, prior to an intervention of work, through its coverage with sheet of transparent polyethylene and disassembled of elements susceptible to breakage, such as mirrors, etc.

85,77 €
RE0487u

Passive protection RF-90 rock wool.

Passive fire protection of all metallic elements arranged in the project. Both the existing reinforcements, IPE profiles under Bigues, and UPN conforming the beam, as well as the new profiles of the reinforcement reinforcement system valued in the measurement. Made by means of projection of retardant of rock wool for metal structures, to achieve an RF-90.

23,11 €
RE0245m

Rascat coating existing existing in coated wood surface.

Rascat of existing coating existing in wood surface, with manual means, by means of scratch and spatula, and subsequent polished surface with mechanical means, by means of scrubber with metallic barbed disk. Even p / p cleaning, stacking, removal and manual load of remains on truck or container.

7,71 €
RE0164u

Drafting of Waste Management Study in Rehabilitation of Façade (10 UI)

Drafting of the Waste Management Study for Works described in the Facade Rehabilitation Execution Project with intervention in 10 inspection units, in accordance with what is established in Royal Decree 105/2008, From February 1, 2008, from the Ministry of Presidency, which regulates the production and management of construction and demolition waste.

552,58 €
RE0173u

Drafting of building rehabilitation project (1 UI)

Drafting of rehabilitation execution project for 1 inspection unit, consisting of writing and assessment of the complementary report of the building, study and evaluation of the executed coves (if applicable) and description of the solution for At the repair of the pathologies detected in structure, covers, facades and facilities. Includes: visits and displacement, visit from the expert for inspection of the property, report of the document, specifications, budget and plans.

3.460,21 €
RE0171u

Drafting of building rehabilitation project (10 UI)

Drafting of rehabilitation execution project for a building or local with 10 inspection units, consisting of writing and evaluation of the complementary report of the building, study and evaluation of the coves executed (if applicable) and Description of the solution for the repair of the pathologies detected in structure, covers, facades and facilities. Includes: visits and displacement, visit from the expert for inspection of the property, report of the document, specifications, budget and plans (with an intensity of minimum inspection of 10 IU).

5.902,74 €
RE0172u

Drafting of rehabilitation project of building (20 UI)

Drafting of rehabilitation execution project for a building or local with 20 inspection units, consisting of writing and evaluation of the complementary report of the building, study and evaluation of the coves executed (if applicable) and Description of the solution for the repair of the pathologies detected in structure, covers, facades and facilities. Includes: visits and displacement, visit of the expert for inspection of the property, report of the document, specifications, budget and plans (with an intensity of minimum inspection of 20 UI).

6.788,13 €
RE0168u

Drafting of a building rehabilitation project (50 UI)

Drafting of rehabilitation execution project for a building or local with 50 units of inspection, consisting of writing and evaluation of the complementary report of the building, study and evaluation of the coves executed (if applicable) and Description of the solution for the repair of the pathologies detected in structure, covers, facades and facilities. Includes: visits and displacement, visit of the expert for inspection of the property, report of the document, specifications, budget and plans (with an intensity of minimum inspection of 30 IU).

10.943,44 €
RE0008m

Forged reinforcement with IPE-100 up to 3.50 m. Includes previous and pointing work.

Functional replacement of forged, in the areas indicated in plans, consisting of the reinforcement of each beam through IPE-100 S-275-JR profiles, in accordance with the description of the project and the directions of the facultative management, including the following materials and works:

94,35 €
RE0009m

Reinforcement of forged IPE-120 up to 3.5 m. Includes previous and pointing work.

Functional replacement of forged, in areas indicated in plans, consisting of the reinforcement of each beam through profiles IPE-120 S-275-JR, in accordance with the description of the project and the prompts of the faculty management, including the following materials and Works:

99,64 €
RE0010m

Reinforcement of forged IPE-140 up to 4 m. Includes previous and pointing work.

Functional replacement forged, consisting of the reinforcement of each beam through IPE-140 S-275-JR profiles, including the following materials and work:

105,16 €
RE0011m

Reinforcement of forged IPE-160 up to 3.5 m. Includes previous and pointing work.

Functional replacement of forged, in the areas indicated in plans, consisting of the reinforcement of each beam through profiles IPE-160 S-275-JR, in accordance with the project description and the prompts of the faculty management, including the following materials and Works:

112,60 €
RE0064m

Successful repair forged singing and coating, width 35 cm.

SANITE AND REPARATION Wrought chanting seen wide 35 cm, in the main access and housing access, prior chopped coating or in poor condition, structural sanitation of structural concrete, passivate of armor and reconstruction of the section affected with mortar of resins type applicatecr4 or similar, reconstruction of edges and surface finish with plastering cement mortar 1: 6 in good view, final coating application with painting in silicate in tones similar to the existing one, even auxiliary means, necessary scaffolding , withdrawal of excess material and cleaning.

39,53 €
RE0207m

Natural stone streak coating, Llevant cream.

Supply and placement of strain coating with a straight shape, on a scale of 100 cm wide, by assembling the following elements: Extended marble Levant cream, polished finish and marble striker Llevant cream, polished finish of 3 and 2 cm thick respectively, face and polished edges, received all this with M-5 cement mortar, placed on a previous step (not included in this price). Even running with cement board mortar, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces.

72,15 €
RE0002

Painting coating in exterior silicate

Decorative coating facade with paint in silicate, for the realization of the finishing layer in continuous double layer coatings; Clean and repeat prior to support in good conservation, background with a preparation based on potassium silicate and acrylic emulsions and two finishing hands (performance: 0.167 l / m² each hand).

11,10 €
RE0226

Monolayer coating on facades, on pillars and forged in front

Training on continuous coating facade of 20 mm thick, waterproof in rainwater, with monolayer mortar for waterproofing and decoration of facades, scraped finish, white color, compound of cements, additives, synthetic resins and mineral loads, with Placement of fiberglass mesh antalcalis in the center of the mortar thickness, to arm it and reinforce it. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block, after application of a layer of waterproof mortar, 10 mm thick, composed of cement, selected aggregates and additives, in those places where S ' they appreciate plain or adherence deficiencies (25% of the surface of the parament). Even P / P surface preparation support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, formation of Boards, corners, masters, edges, grindings, branches, lintels, finishes in meetings with walls, coatings or other elements received on their surface, and / assembly, disassembly and rental of proprinement approved.

27,65 €
RE0390

Monolayer coating, on forged saddles and fronts.

Formation in continuous coating facades of 20 mm thick, waterproof in rainwater, with monolayer mortar for waterproofing and decoration of facades, frosted finish, color similar to the existing one, composed of cements, additives, synthetic resins and Mineral loads, with placement of fiberglass mesh antalcalis in the center of the thickness of the mortar, to arm it and reinforce it. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block, after application of a layer of waterproof mortar, 10 mm thick, composed of cement, selected aggregates and additives, in those places where S ' they appreciate plain or adherence deficiencies (25% of the surface of the parament). Even P / P surface preparation support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, formation of Boards, corners, masters, edges, grindings, branches, lintels, finishes in meetings with walls, coatings or other elements received on their surface, and / assembly, disassembly and rental of proprinement approved.

32,57 €
RE0381

Promastic fiber coating, for tread finish.

Application of Bituminous Master Promastic Fiber, up to a thickness of 2 mm, upon cleaning of support, aspirated from residual powder, printing mask with 20% diluted imprint, and finished with 2 hands of promotic, average performance of 2- 2.5 kg / m² and layer, according to manufacturer's indications.

19,67 €
RE0114

Sanitated from floor-silling coating. SUP 30%.

Sanitation of the coating of the terrace's springs, consisting of the punctual chopping of areas in poor condition and reconstruction with cement mortar Dosage 1: 6, even withdrawal of excess material and cleaning.

15,81 €
RE0121

Thermocal thermocal system of thermal insulation and mineral facades coating.

Facade energy rehabilitation, through thermal insulation and mineral facade coating, on its outer face, with the Thermocal Dbblok system, consisting of a layer of mortar of thermal and acoustic insulating, thermocal, 20 mm thick, applied through Mechanical projection with a 15 kg / m² performance, and a layer of lime monolayer mortar, Ibercal Master 450 Thermo, endeared finish, color to choose, 10 mm thick.

32,07 €
RE0201u

Replacement of an external balcony spillway.

Replacement of balcony spillway, including vacuum enlargement in factory wall, withdrawal of previous Broc, installation of new crayer executed with profile of rectangular PVC 5x4 cm, even pending and filling of perimeter, flight minimum 3 cm.

20,54 €
RE0014u

Inspection tasting in plaster coating.

Inspection tasting in plaster coating, at a height of up to 3.00 m, for the inspection of the different layers and type of base material, with manual means, without including the replacement of them.

30,38 €