Aggregates and stones

CodeUDescriptionPrice
RE0050

Breaked cement mortar base, master.

Training on facades and interior walls, of base layer of 15 mm thick, for continuous double layer coatings, with plastering of cement mortar, gray, cement composite, selected aggregates and additives, end-up, waterproof finish 'rain water. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block. Even proportional part of preparation of the surface support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, training of boards , corners, masters, edges, grinding, branches, lintels, finishes in meetings with walls, coatings or other elements received on their surface.

18,79 €
RE0049

Base buzzer, with cement mortar in good view.

Formation on facades and interior walls, of 15 mm thick layer, for continuous double layer coatings, with plastering in good view of cement mortar, gray, cement composed, selected aggregates and additives, endewly finished, waterproof to rainwater. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block. Even proportional part of preparation of the surface support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, training of boards , corners, masters, edges, grinding, branches, lintels, finishes in meetings with walls, coatings or other elements received on their surface.

13,41 €
RE0037

Placement of natural stone threshold and ramp formation Access to lobby.

Supply and placement of granite tile pavement (model to be specified), for exteriors, on a threshold access to community lobby, in 80x120x2 cm wide pieces, polished finish; Received with cement mortar, with M-5 spring sand, made in work without retardants. Even formation of continuous perimeter together, in width not less than 5 mm, in the limits with walls, exempt pillars and level elevations and, where appropriate, partition boards and structural or expansion joints existing in the support; Fixed with mortar of cement boards, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces and cleaning. Placed in slope to set up ramp to 25% slope.

80,64 €
RE0045

Demolition of natural stone pavement.

Demolition of existing pavement inside the building, natural stone tiles, and chopped from the union material without including the demolition of the base base, with manual means, without deteriorating the contiguous constructive elements. Even proportional part of cleaning, gathering, removal and manual cargo of rubble on truck or container.

12,10 €
RE0214

Demolition of natural stone plated, placed with mortar.

Demolition of placard of natural stone plates and chopped the base layer of mortar, with electric hammer, eliminating it totally without deteriorating the surface support, which will be uncovered and prepared for its subsequent coating. Even proportional part of cleaning, gathering, removal and manual cargo of rubble on truck or container.

9,69 €
RE0205

Tiled natural stone 60x30x2 cm, cement mortar, in Estesa.

Supply and placement of marble tile pavement Levante, for interiors, 60x30x2 cm, polished finish; Received with M-5 cement mortar, made in work without retardants. Even formation of continuous perimeter together, in width not less than 5 mm, in the limits with walls, exempt pillars and level elevations and, where appropriate, partition boards and structural or expansion joints existing in the support; Fixed with mortar of cement boards, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces and cleaning.

59,13 €
RE0206m

ENVOLATE NATURAL STONE CREAM Levant, in Saltacavall.

Supply and placement of marble envelope Cream Lift from a piece in Saltacavall of 42x18x2 cm, face and polished edges, received with M-5 cement mortar, on a scale with staggered previously coated (not included in this price). Even running with cement board mortar, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces.

11,16 €
RE0204m

Surveys natural stone. Cream Levant, 18x2 cm.

Supply and placement of marble envelope Cream Llevant, for interiors, polished; Received with enhanced cement adhesive, C2 tea, with reduced slip and expanded open time. Even running with cement board mortar, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces.

8,29 €
RE0235m

10x2 cm calcareous stone spitter, with breakage.

Formation of Capri limestone Capri or similar, from 110 to 150 cm in length, from 8 to 10 cm in width and 2 cm thick, with trencaaaaas, face and edge polished, with clear slope and embedded in the jambs, Covering the sills, the departments of the parameters, the facade cornices, etc., received with mortar of hydrophift cement M-10. Even P / P of preparation and regularization of support with mortar mortar M-10, riddled between pieces and unions with walls with mortar of special boards for natural stone coatings.

16,08 €
RE0119m

Capri Calcary Stone Capri Spitting Capri.

Formation of Capri calcareous spitter, from 110 to 150 cm in length, from 21 to 25 cm wide and 2 cm thick, with trornaaaas, face and edge polished, with clear slope and embedded in the jambs, covering the Settings, departments of the parameters, facade cornices, etc., received with mortar of hydrophift cement M-10. Even proportional part of preparation and regularization of support with mortar of hydrophift cement M-10, riddled between pieces and unions with walls with mortar of special boards for natural stone coatings.

25,89 €
RE0207m

Coating step natural stone Crema Levante.

Supply and installation of siding with straight step on scale of 100 cm wide, by assembling the following elements: Crema Levante extended marble, polished finish and cream marble front Levante 3 and polished finish 2 cm thick respectively, face and polished edges, received all with cement mortar M-5, placed on a stepped before (not included in the price). Even grouting cement mortar joints, CG1 for meeting minimum (between 1.5 and 3 mm), with the same tone of the pieces.

72,15 €
RE0227

Sanitated stone walls seen in interiors

Sanitation of stone walls, in interior housing cloth, consisting in: Emptying stone joints in a depth of 2 to 5 cm, replacing gradient stones and bricks and clean with a metallic brush. Fill the joints, gaps and huts of support with the base mortar of plastering, or directly with the coatings. Also stacking, removal and burden of rubble and remains generated on truck or container

30,18 €
RE0203

Superficial finish treatment in marble interior pavement.

Polished and polished pavement of natural stone through polished and polished machine by means of brush machine with plate of wool of steel or synthetic sponge, interior marble floor; The polite will consist of three phases: the first (unpleasant or reduced) to eliminate the eyebrows that could exist, using a spring of 60, depending on the type of natural stone and the state in which the pavement is found; The second (planned or polished bast) to eliminate the scratches and defects produced in the previous phase, with grain abrasive 120, extending then the pasta for together, keeping the wet surface 24 hours and letting other 48 hours before the next process; and the third (tuning), with Abrasive of Grain 220; The brillant will be made through the method of crystallized using moles of 400 or higher with later application of rulered product, once it is perfectly dry and uniform the pavement. Even proportional part of union after the polished Bast, withdrawal of sludge from the fine polishing and pre-polished cleaning.

11,05 €
RE0208

Plated with natural stone plates fixed with cement sticker.

Supply and placement of plated Vertical, up to 3 m in height, with marble plates Levant cream, polished finish, 40x20x2 cm, hooked to the support support with enhanced cement adhesive, C2 tea, with reduced slip and Extended open time, gray. Rejuncher with cement board mortar, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces. Even proportional part of pre-preparation of plates and parament support, formation of boxes, cuts, edges of edges, making meetings with other materials, joints, cruises of PVC and special pieces.

59,49 €