Unions

CodeUDescriptionPrice
RE0026

Claraboia raised from 3 to 6 m² without exploitation

Claraboia raised, even anchor and accessory claws, 3 to 6 m², with withdrawal of rubble and load, without including transport to the landfill, according to NTE / ADD-18.

23,70 €
RE0341

Anchorage Vareta Steel diameter 12 mm and Longuity 250 mm, Resin.

Structural chemical anchor for adherence applied on massive compressed concrete support Characteristic resistance 20 n / mm², performed through the insertion of barnille rush with female and washer, quality galvanized steel 5.8 seconds UNE-EN ISO 898-1, 12 mm in diameter and 250 mm in drill length made on the support of 14 mm in diameter and 115 mm in depth previously filled through injection of high resistance epoxy resin; With the following characteristics: separation between two anchors of 220 mm, distance to the edges of the 110 mm anchor base, minimum thickness of the base of 140 mm, maximum thickness of the piece to set 120 mm.

7,83 €
RE0055

Tiled with porcelain tile, placed with adhesive C1.

Supply and placement of tiled with polished porcelain stoneware, 1/0 / - - (Parament, type 1; without additional requirements, type 0; no additional requirement, type - / -), 40x40 cm, € 22 / m² , received with normal cement adhesive, C1 without any additional feature, gray, with double gluing. Even proportional part of preparation of the surface plaster support or plasterboard; Replacement, cuts, PVC cantoners, and together; Rejuncher with white cement, L, BL-V 22.5, for minimum board (between 1.5 and 3 mm), colored with the same tonality of the pieces; Finished and final cleaning. Not included the base support base with cement mortar ruler.

42,28 €
RE0052

Tiled porcelain tiles placed with glue cement adhesive.

Supply and execution of pavement through the method of placing in thick layer, ceramic tile of porcelain stoneware, polished 2/0 / - (pavements for traffic for mild pedestrians, type 2; No additional requirements, type 0 ; No additional requirement, type - / -), from 41x41 cm, € 22 / m²; Received with normal cement adhesive, C1 without any additional characteristic, gray, with double gluing, and rejoed with white cement beey, L, BL-V 22.5, for minimum board (between 1.5 and 3 mm) , colored with the same tonality of the pieces. Even proportional part of cleaning, surface checking support, rethinking, cuts, continuous perimeter formation, in width not less than 5 mm, in the limits with walls, exempt pillars and level elevations and, if applicable, if applicable, if applicable, Partition joints and structural boards existing in the support, elimination of the excess material from the rejuncture and final cleaning of the pavement.

44,59 €
RE0112

Tiled on cement or concrete mortar support, with adhesive C2.

Supply and placement of tiled with enamelled stoneware, 1/0 / / e (Parament, type 1; without additional requirements, type 0; exterior, type - / e), 20x20 cm, € 8 / m², received with Enhanced cement adhesive, C2 without any additional feature, gray. Even proportional part of the surface preparation of cement mortar support or concrete; Replacement, cuts, PVC cantoners, and together; Rejuncher with cement board mortar with high resistance to abrasion and absorption of reduced water, CG2, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces; Finishing and final cleaning

32,03 €
RE0053m

Environment of ceramic piece, placed with adhesive C1.

Supply and placement of enamelled ceramic ceramic environse, 7 cm, € 3 / m, received with exclusive use cement adhesive for interiors, CI without any additional feature, gray and rejunted with cement board mortar , CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces.

7,61 €
RE0054m

Environment of porcelain piece, placed with adhesive C1.

Supply and placement of porcelain ceramic pottery, polished of 7 cm, € 5.5 / m, received with exclusive cement adhesive for interiors, CI without any additional feature, gray and rejunted with mortar of mortar of Cement boards, CG1, by open board (between 1.5 and 3 mm), with the same tonality of the pieces.

10,14 €
RE0206m

ENVOLATE NATURAL STONE CREAM Levant, in Saltacavall.

Supply and placement of marble envelope Cream Lift from a piece in Saltacavall of 42x18x2 cm, face and polished edges, received with M-5 cement mortar, on a scale with staggered previously coated (not included in this price). Even running with cement board mortar, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces.

11,16 €
RE0204m

Surveys natural stone. Cream Levant, 18x2 cm.

Supply and placement of marble envelope Cream Llevant, for interiors, polished; Received with enhanced cement adhesive, C2 tea, with reduced slip and expanded open time. Even running with cement board mortar, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces.

8,29 €
RE0008m

Forged reinforcement with IPE-100 up to 3.50 m. Includes previous and pointing work.

Functional replacement of forged, in the areas indicated in plans, consisting of the reinforcement of each beam through IPE-100 S-275-JR profiles, in accordance with the description of the project and the directions of the facultative management, including the following materials and works:

94,35 €
RE0009m

Reinforcement of forged IPE-120 up to 3.5 m. Includes previous and pointing work.

Functional replacement of forged, in areas indicated in plans, consisting of the reinforcement of each beam through profiles IPE-120 S-275-JR, in accordance with the description of the project and the prompts of the faculty management, including the following materials and Works:

99,64 €
RE0010m

Reinforcement of forged IPE-140 up to 4 m. Includes previous and pointing work.

Functional replacement forged, consisting of the reinforcement of each beam through IPE-140 S-275-JR profiles, including the following materials and work:

105,16 €
RE0135u

Supply and placement plate anchorage Herms

Supply and placement of HERMS anchoring plate, with 4 anchors of 12 mm, arranged on reinforced concrete beam, drills and chemical anchor with epoxy resin type Save-Chem or similar, Galvanized threaded rod 12 mm, thread and washer Flat, on regular basis with mortar of resins type applicatecr4 or similar, anticorrosive protection with thkrom paint or similar; Totally placed unit, a proportional parts and auxiliary means necessary, withdrawal of excess material and final cleaning.

44,58 €
RE0208

Plated with natural stone plates fixed with cement sticker.

Supply and placement of plated Vertical, up to 3 m in height, with marble plates Levant cream, polished finish, 40x20x2 cm, hooked to the support support with enhanced cement adhesive, C2 tea, with reduced slip and Extended open time, gray. Rejuncher with cement board mortar, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces. Even proportional part of pre-preparation of plates and parament support, formation of boxes, cuts, edges of edges, making meetings with other materials, joints, cruises of PVC and special pieces.

59,49 €