Acer

CODEUDESCRIPTIONPRICE
RE0017

Finishing synthetic enamel on wood with steel handrails on both sides.

Synthetic enamel, black, glossy finish on surface of iron or steel, cleaning and surface preparation to paint, using manual methods to leave it free of grease, finishing with both hands with synthetic enamel with a minimum thickness of the 35 micron dry film ma (yield: 0.08 l / m²)

16,55 €
RE0030m

Raised PVC pipe horizontal collectors.

Lifted collector horizontal, even and load removal truck or container.

5,56 €
RE0513m

PVC sewer pipe buried 250-mm, filled ditch

Buried collector made with a smooth PVC pipe for sanitation, diameter 250 mm, binding thickness and glued under the UNE

RE0514m

PVC sewer pipe buried-315 mm, filled ditch

Buried collector made with a smooth PVC pipe for sanitation, diameter 350 mm, binding thickness and glued under the UNE

RE0512m

Collector buried pipe PVC-200 mm, filled ditch

Buried collector made with a smooth PVC pipe for sanitation, diameter 200 mm, binding thickness and glued under the UNE

RE0133u

Placing anchor plate steel S-275-JR, 250x250x10 mm.

Supply and installation of anchor plate steel S-275-JR and dimensions 250x250x10 mm, with 4 holes 14 mm, arranged on concrete edge beam, drills and chemical anchor with epoxy resin or similar type DESA-CHEM, 12 mm galvanized threaded rod, nut and flat washer on basic regularized with mortar type resins AplicatecR4 or similar corrosion protection paint Thkrom or similar union and L100x100x10 mm welded angle as an element of the support beam; unit fully placed, proportional means and scaffolding necessary aid, removal of excess material and final cleaning.

42,63 €
RE0515u

Wiring collector zone of services, local

Reinstalling the installation and connection of collectors buried inside an evacuation unit for cleaning internal premises, consisting of a toilet-bowl and pedestal, made of smooth PVC pipe 40-110 mm, series B (UNE-1329-1) for the drainage network connecting these devices. Even o.g. individual referrals, connections, accessories and fasteners, wiring the fan, closer. Even o.g. concrete base mass average thickness of 10 cm in parts sections of collectors. Installation according to CTE. DB. HS safety. Preconditions support: Before beginning the activities relating to the implementation process will be conducted the following checks: will check that its location and route correspond to the Project and that there is enough space for installation and connection to the existing down. Includes presentation int. arch. tubes, special pieces, elbows, joints, fasteners, testing services, protection against shock, filling Trados perimeter arch., finishes, except for the floor finish. Training holes connected to tubes, sealing joints and inner-ext. Even in airtight hatch closure and no odor mefítics frame. There will be closure plugs at points drain until receipt of wares. Mechanical strength and tightness guaranteed. > Unit completely finished and tested its operation.

RE0065m

Provision collecting water canal

Supply and installation of prefabricated gutter for water collection, polymer concrete section 20x20 / 15 galvanized grid raster unit connected to sewer with PVC pipe, pre-prepared trench opening electric hammer wedge the duct, concrete pieces and wardrobe result hearth existing finishes perimeter and cement tiles rejunte finishing, cleaning and removal of excess material

130,77 €
RE0081m

Empresillt PNL-pillar 40x40 cm 100.10 mm

Strengthening support rectangular concrete dimensions of 40x40 cm confinement lattice of four standardized profiles hot rolled steel PNL-S275 100.10 mm 15 kg / m according to UNE 10025-2 willing to support the edges and joined in platabandes all four sides by metal welded joint in situ, each 25 cm by constriction cooling even contribution of welding material according to UNE-EN ISO 2560, worked and placed.

254,83 €
RE0091

Front panel dual-blade profiled sheet steel with insulation in between.

Closing double leaf facade, exterior panel made of sheet steel S320 GD profiled ribbed galvanized 0.6 mm thick and 30 mm height of ridge insulation blanket glass wool hygroscopic not covered by one of its faces a veil of reinforced glass, according to UNE-EN 13162, 60 mm thick tray tray support inside ribbed galvanized steel sheet of 0.6 mm thickness, even proportion of cavalcaments, wastage and accessories hidden fastening and sealing elements and other work necessary for the formation of gaps, joints, corners, shots and meetings with other materials. Fully assembled, with removal of excess material and container cargo.

44,54 €
RE0215u

Strengthening collar based on concrete pillar 25x25 cm, with PNL40.4

Base reinforced concrete pillar dimensions 25x25 or diameter 25 cm with metal collars of PNL-angle 40.4 mm hot rolled S275 steel, joined together by welding, including welding and in situ filling of space between concrete and steel with a layer of 1.5 mm epoxy two components.

124,73 €
RE0216m

Metal reinforcement concrete pillar 25x25 cm, with PNL40.4

Strengthening support rectangular concrete dimensions of 25x25 cm confinamiemto lattice of four standardized profiles hot rolled steel S275 PNL-40.4 mm 2.42 kg / m according to UNE 10025-2 willing to support the edges and joined in platabandes all four sides by metal welded joint in situ, each 25 cm by constriction cooling even contribution of welding material according to UNE-EN ISO 2560, worked and placed.

311,12 €
RE0135u

Supply and installation anchor plate HERMS

Supply and installation of anchor plate HERMS with four anchors 12 mm, arranged on concrete edge beam, drills and chemical anchor with epoxy resin or similar type DESA-CHEM, 12 mm galvanized threaded rod, nut and washer Flat on base regularized with mortar type resins AplicatecR4 or similar corrosion protection paint Thkrom or similar; unit fully placed, proportional means and scaffolding necessary aid, removal of excess material and final cleaning.

44,58 €