Pretense concrete

CodeUDescriptionPrice
RE0144

Pottering forged concrete beam.

Shoring of forged self-resistant beams of lights up to 4.5m, with compounds, sleeping and metallic struts, considering 5 uses on wooden elements and 50 uses in metallic struts, even disappointment, cleaning and storage.

5,33 €
RE0001

Sky of plate plate, ribbed, 100x60 cm

Plate of plaster, ribbed, 100x60 cm and 8 mm thick, 20 mm of total thickness including the ribs, with straight edge and finished smooth, without coating, for shades, even proportional part of straps and stups D 'Escaiola to forged.

13,21 €
RE0133u

Placing anchor plate steel S-275-JR, 250x250x10 mm.

Supply and placement of anchor plate steel S-275-JR and dimensions 250x250x10 mm, with 4 holes of 14 mm, arranged on beam of reinforced concrete, drills and chemical anchor with epoxy resin type Save-Chem or similar, Galvanized threaded rod 12 mm, thread and flat washer, on regular basis with mortar of resins type applicatecr4 or similar, anti-corrosive protection with thkrom paint or similar, and welded union of angular L100x100x10 mm as an element of support for BIGIG; Totally placed unit, a proportional parts and auxiliary means necessary, withdrawal of excess material and final cleaning.

42,63 €
RE0074

Demolition of false detachable ceiling of plaster plates.

Demolition of false recording ceiling of plasterboards, with manual means, without deteriorating the constructive elements that are subject. Even proportional part of demolition of straps, profiling support and suspension structures, false beams, strikers, moldings, cornices and finishes, cleaning, gathering, removal and manual load of rubble on truck or container.

9,48 €
RE0076

Demolition of forged concrete beams

Demolition of forging of concrete beams, with pneumatic hammer and compressor, removal of ruins and load on truck or container.

59,43 €
RE0092

Pluvial wall on a half wall with asphaltized plates.

Rainwall of up to 12 m in height, formed by asphalt plates 10 waves, corrugated profile and black color with direct fixing system, layout of plates in ribbed and fixed walls on the wall halfway directly on ceramic support with empty keys . Even proportional part of accessories, finishes and fixing elements. Fully mounted, withdrawal of excess material and load in containers. Without considering scaffolding or means of lifting in cut.

18,19 €
RE0142m

Bottle Bottle Face Break forged, for reinforcement Motoroviga system.

Chopped from plaster plaster in horizontal walls of the base of the sneakers of beams that have to be reinforced or sanished until they completely leave and clean the lower face of the same for the correct union between these and the system of Reinforcement used, even the proportional proportional part of demolition of the inservigating rivers of forged forged for the correct execution of the reinforcement actions of beams with mechanical or similar system, cleaning, collection and load of rubble on foot of Load.

8,79 €
RE0141m

Bullfight Beautiful Fack plaster

Crushed plasterboard of the lower face of the beams of a forged, until leaving its surface completely seen and clean, even cleaning, collection and loading of rubble in truck or container.

3,68 €
RE0222u

Wooden prosthesis with fiberglass armor.

Broach repair by eliminating the deteriorated area and placing a prosthesis from the same section as the existing beam and up to 30 cm of wild pine saw (Pinus sylvestris), brushed finish, for structural applications, structural quality MEG according to UNE 56544, resistant class C-18 according to UNE-EN 338 and UNE-EN 1912 and protection against biotic agents that correspond to the NP2 penetration class (3 mm in the side faces of the Albeca) according to UNE-EN 351 -1, adhered to healthy wood through epoxy-acrylate resin, styrene free, and later arming with two wood union using 2 fiberglass rods reinforced with polyester resin, 12 mm in diameter, 0 , 05 m in length each, housed in perforations made in the prosthesis and healthy wood. Even proportional part of sanitation of the wooden piece, cutting 60 ° of healthy wood to receive the prosthesis, provisional fixation of the prosthesis through carpenter cats and keys, execution of perforations in the prosthesis and in the wood Healthy, punched with epoxy resin in perforations after placing the rods, polished imperfections, cleaning, stacking, removal and manual loading of demolitions on truck or container.

102,07 €
RE0483m

Reinforcement in bending bending, carbon fiber sheet, Kimia house

Reinforcing flexion for the lower face, through the Kimitech Plate system, formed by carbon fiber laminate of 50 mm wide 1.4 mm thick, and mechanical resistance to breaking according to the direction of the fiber of 3000 MPa, cabbage · Located with Kimitech EP-TX adhesive, on a preceding surface and pressured with Kimicover fixed

RE0008m

Forged reinforcement with IPE-100 up to 3.50 m. Includes previous and pointing work.

Functional replacement of forged, in the areas indicated in plans, consisting of the reinforcement of each beam through IPE-100 S-275-JR profiles, in accordance with the description of the project and the directions of the facultative management, including the following materials and works:

94,35 €
RE0009m

Reinforcement of forged IPE-120 up to 3.5 m. Includes previous and pointing work.

Functional replacement of forged, in areas indicated in plans, consisting of the reinforcement of each beam through profiles IPE-120 S-275-JR, in accordance with the description of the project and the prompts of the faculty management, including the following materials and Works:

99,64 €
RE0010m

Reinforcement of forged IPE-140 up to 4 m. Includes previous and pointing work.

Functional replacement forged, consisting of the reinforcement of each beam through IPE-140 S-275-JR profiles, including the following materials and work:

105,16 €
RE0011m

Reinforcement of forged IPE-160 up to 3.5 m. Includes previous and pointing work.

Functional replacement of forged, in the areas indicated in plans, consisting of the reinforcement of each beam through profiles IPE-160 S-275-JR, in accordance with the project description and the prompts of the faculty management, including the following materials and Works:

112,60 €
RE0485m

Reinforcement of forged MVH. Motoroviga, 4,00-4.50 l

Functional replacement of unidirectional forged beam through telescopic-extensible profile with colis zippers for its maximum light adjustment with lights between 4.00 m and 4.50 m. The profile is made in three sections and built in zinc-shaped and bicromated gold-colored steel sheet, with thickness of 4 mm sheet and 6 mm in central. MVH type, supported on posters with chemical anchorage and threaded rods M12X125 with thread and volaster for screwed mounting. With supply of resin of two components threaded rods and mortar according to mechanoviga specifications. Included assembly in work. Measures the executed length.

RE0486m

Reinforcement of forged MVV, Motoroviga, 4,00-4.50 ml

Functional replacement of unidirectional forged beam through a telescopic-extensible profile with colis zippers for its adjustment at maximum light, with lights between 4.00 m and 4.50 m. The profile is made in three sections and built in zincated and bicromatated gold-colored steel sheet, with thickness of 4 mm sheet at ends and 6 mm in central. MVV type, supported by cartel with chemical anchor and threaded rods M12X125 with thread and volaster for mounting screwed or through special support system on existing UPN profile. With supply of resin of two components threaded rods and mortar according to mechanoviga specifications. Previously, the plaster of the vertical setting will be removed and later according to type of forged the part of cells of the revolt be ceramic or concrete will be eliminated, the vertical floor will be prepared to receive the anchors of the posters and in the case of Supporting Murs will take a concrete dice under the Bigaeta, which will serve as distribution of loads and anchorage point of the system support cartel. Subsequently, the MVH assembly will be assembled. Subsequent assembly of the MVV profile with its sealing to pour the self-leveling mortar being finally embedded the existing beam. Measure the reinforced beam length.

RE0479m

Forged reinforcement with MVV12 Motoroviga system. length 3.50ml

MW12 3250: active reinforcement of beams in unidirectional slabs through the use of three elements of telescopic profile telescopic stainless steel sheet S235JR Zincat type Omega de la Casa Motos MW12 3250 D.I.T. 331 / r coupled and joined together through the use of high resistance screws achieving the transmission of efforts by filling in spaces with controlled retraction mortars and attracted them with mortars without retraction type Betec Serena 110. I. Exempt from chlorides and metallic aggregates and fixed the system to media through folding steel plates and chemical or mechanical anchors depending on the type of material and according to project specifications and manufacturer, high resistance screws class 8'8 and M-12. Including the proportional part of mortars of filling and attacking, stainless steel profile, special support or connection systems, supports and support mechanisms as well as all necessary accessories, anchors to resistant structural elements and stainless steel screws, Ended in work, even chopped with enclosures, coatings, chopped of massifs in beams or structural elements and demolition of the corner for the correct coupling of beams, perforations and commissioning, small material and electrical supply necessary, demolition of The upper spindles of partitions that act against beams and plaster coating in vertical and horizontal walls necessary for execution if it comes or opening of necessary gaps in partitions and facades for the necessary maneuver or actions. Fully executed and according to details and project memory and specifications of the manufacturer. The supply and placement of special pieces and the opening of scaffolding holes is included.

RE0480m

Forged reinforcement with MVV16 Movement System. length 3.50ml

MW16 3250: Active reinforcement of beams in unidirectional slabs through the use of three elements of telescopic profile telescopic stainless steel sheet S235JR Zincat type omega of the MW16 MECANOVIGA House MW16 3250 D.I.T. 331 / r coupled and joined together through the use of high resistance screws achieving the transmission of efforts by filling in spaces with controlled retraction mortars and attracted them with mortars without retraction type Betec Serena 110. I. Exempt from chlorides and metallic aggregates and fixed the system to media through folding steel plates and chemical or mechanical anchors depending on the type of material and according to project specifications and manufacturer, high resistance screws class 8'8 and M-12. Including the proportional part of mortars of filling and attacking, stainless steel profile, special support or connection systems, supports and support mechanisms as well as all necessary accessories, anchors to resistant structural elements and stainless steel screws, Ended in work, even chopped with enclosures, coatings, chopped of massifs in beams or structural elements and demolition of the corner for the correct coupling of beams, perforations and commissioning, small material and electrical supply necessary, demolition of The upper spindles of partitions that act against beams and plaster coating in vertical and horizontal walls necessary for execution if it comes or opening of necessary gaps in partitions and facades for the necessary maneuver or actions. Fully executed and according to details and project memory and specifications of the manufacturer. The supply and placement of special pieces and the opening of scaffolding holes is included.

RE0477m

Structural reinforcement of beams with armed structural mortar reinforcement

Reinforcement of reinforced concrete 12 cm of soul, through reinforced reinforced 6-8 cm in the lower face and width 12 cm, made with structural repair mortar PCC4 Applicatec fluid or similar, Sika monotop PCC50 or Promompa Betec 600 or similar, discharge in interior metal profile in the form of U, section 120x80x4 mm, as a lost formwork, variable trace and overlapping profiles, stubborn with telescopic metallic profile, on dorment of wood, Each 1 m, prior brushing of the beam and elimination of plaster or mortar coatings, surface and passivate repair of armors with inhibitory mortar of corrrosion type EPOCEM or similar, application of resin bridge binding type will arrive or similar, Provision of nuva armor of reinforcement with 2 rods of 12 mm, overcovered in the anchorage armor support, with drilling and injection of epoxy-acrylate resin type Betec n or similar, disposition of rings of diameter 4 mm in shape d 'U anchored to the support of l In Bigueta, arranged every 30 cm, resin and linked to the new Longuitual Armor, preparation of the lost formwork and discharge of the structural mortar of recreation through injection pumping machine; Unmasked and lateral attacked with structural mortar. Acer UNE-EN 10080 B 500 S, with a quantity of 3 kg linear meter. Even p / p of chopped and sanitated from the lower face of the beam to recreate; Direct connection of the original longitudinal armor and reinforcement through forks conveniently welded with others; cleaning the surface of the concrete; Application of a continuous layer of thixotropic adhesive of two components based on epoxy resin, on the surface of hardened concrete; Assembly of the formwork; spill of concrete; Disassembly of the formwork and cleans the remains generated.

RE0481

Upper reinforcement of unidirectional forged, layer of compression

Superior reinforcement of unidirectional forging of wooden beams, through a layer of compression of reinforced concrete, 5 cm, medium thickness, with reinforcement of negative with 2 of 12 mm and cast mesh 15x15, 8 mm in diameter, executed In situ, concrete lightened with structural arch, resistance 2.5 MPA and density 500 kg / m³, drilling and resin of rods in beams, linked to mesh of cast, even execution of perimeter lace in wall for anchorage of the Army , races in tabiyiería and pp of rings

RE0218

Sanitation of beams in forged and structural repair.

Concrete Bumper Intervention consisting of: Chopped coating ceiling of wetlands to achieve beams, sanitation of armor with manual planner, treatment of armor affected by oxidation through passivant product, reconstruction of the beam through special Mortars sika or Similar

34,11 €
RE0143m

Structural sanitary face Bottle concrete beaker.

Sanitation of concrete or ceramic beam by demolishing existing coating, court of the enclosures or interior partitions that they act against, clean the support until they completely clean the concrete or the base of the shoe, sanitation of the zones folved by corrosion, passivated Of the armors with an inhibitory primer of the Corrosion Sika Ferogard-903 or similar and recomposition of the coating with a structural mortar of high initial resistance and controlled shrinks Sika Top or Structurite of the Thoro house or similar. Even small material and auxiliary means necessary for its execution, coatings similar to those that existed prior to the final action and finishes. Fully executed.

18,28 €
RE0090

Rockwool system for direct trasdosat, laminated plaster plates with built-in insulation, in facade closures.

Direct extradossat on interior partition, made with laminated plasterboards - | (10 + 30) (LR) Labelrock 406.110 | Rockwool, with rock wool isolation, 30 mm thick, incorporated into the plate, received with binding material on the vertical setting; and 55 mm of total thickness, even proportional part of reconsideration of the finished line of parament, the zones of passage and gaps; successive placement, for each plate, of the pallets of binding paste in the support parament; Cut the plates, placement of wedges in the lower part and individual placement of plates through pressure on pallets; formation of expansion together; treatment of areas of passage and gaps; Execution of angles; Treatment of boards through pasta and board tape; Receipt of boxes for accommodation of electrical and installation mechanisms, prior rethinking of its location on the plates and drilling them, and final cleaning. Fully finished and ready to enter, paint or coat.

29,05 €
RE0135u

Supply and placement plate anchorage Herms

Supply and placement of HERMS anchoring plate, with 4 anchors of 12 mm, arranged on reinforced concrete beam, drills and chemical anchor with epoxy resin type Save-Chem or similar, Galvanized threaded rod 12 mm, thread and washer Flat, on regular basis with mortar of resins type applicatecr4 or similar, anticorrosive protection with thkrom paint or similar; Totally placed unit, a proportional parts and auxiliary means necessary, withdrawal of excess material and final cleaning.

44,58 €
RE0217u

Tasting of inspection in lower face Big forged. Aluminosis.

Tasting 1 m² ceiling and sample extraction of pre-strained or armed beam concrete, thus eliminating the plaster of plaster in the lower face of the beam in a length of at least 40 cm, extraction from the sample of no less of 200 gr deepening to be able to see the armor and check its state, through manual methods, without including the necessary repair.

16,66 €
RE0208

Plated with natural stone plates fixed with cement sticker.

Supply and placement of plated Vertical, up to 3 m in height, with marble plates Levant cream, polished finish, 40x20x2 cm, hooked to the support support with enhanced cement adhesive, C2 tea, with reduced slip and Extended open time, gray. Rejuncher with cement board mortar, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces. Even proportional part of pre-preparation of plates and parament support, formation of boxes, cuts, edges of edges, making meetings with other materials, joints, cruises of PVC and special pieces.

59,49 €