Defenses

CodeUDescriptionPrice
RE0017

Finished with synthetic enamel on steel carpentry, two-sided rails.

Synthetic enamel, black color, gloss finish, surface of iron or steel, cleaning and preparation of the surface to paint, through manual methods until leaving it free of fats, finished with two hands with synthetic enamel with a minimum thickness of the 35 microns dry microns (performance: 0.08 l / m²)

16,55 €
RE0033u

Grill raised up to 3 m²

Grated raised, even anchor and accessory claws, up to 3 m², withdrawal of rubble and load, without including transport to the landfill, according to NTE / add-18.

8,14 €
RE0061u

Palette aids at falcados of closures greater 3 m².

Palette aids in falcat exterior carpentry over 3 m², even withdrawing from excess material and final cleaning.

103,47 €
RE0016

Complete deceased of paint in steel carpentry.

Deceasing of existing paintings on railing or metallic grid, with solvents, eliminating the successive layers of existing paint and oxide that could exist, through spatulas or glass roles, even withdrawal of demolition and cargo in container, without Transportation to landfill.

23,02 €
RE0140

Surface deck of metallic rails, with solvent gel.

Deceasing of existing paintings on railing or metallic grid, with solvents, eliminating the successive layers of existing paint and oxide that could exist, through spatulas or glass roles, even withdrawal of demolition and cargo in container, without Transportation to landfill

16,32 €
RE0091

Façade of double leaf of sheet profiled sheet of steel, with intermediate insulation.

Double-leaved facade closure, formed by exterior panel profile of profiled steel ribbed S320 Galvanized Galvanized of 0.6 mm thickness and 30 mm crest height, insulation of non-hygroscopic glass wool blanket covered by one of its faces With a reinforced glass veil, according to UNE-EN 13162, 60 mm thick and tray interior tray of galvanized steel ribban tray of 0.6 mm thickness, even proportional part of horsemen, mines and accessories of Hidden and sealing fixation and other elements and works necessary for the formation of gaps, boards, corners, rowing and encounters with other materials. Fully mounted, withdrawal of excess material and container load.

44,54 €
RE0230

Indoor leaf Facade closure, with LH-7 + isolate PE-40.

Formation of internal partition leaf of 7 cm thick factory, double-handed double ceramic brick, to coat, 33x16x7 cm, received with M-5 cement mortar and internal insulation with 40 mm expansive polystyrene plates of 40 mm. of thickness, even p / p rethinking, leveling and appliance, received from rings and basic buildings, minions, breaks, linked, heads and cleaning

29,89 €
RE0098u

Aluminum exterior carpentry 2 sliding leaves 100x115 cm, with PVC blinds.

Supply and assembly of aluminum carpentry, white lacquer, with 60 microns of minimum thickness of dry film, for aluminum window shaped, simple sliding, 100x115 cm, basic series, formed by two leaves, and without Base construction Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Compact incorporated (monoblock), rolling blinds of PVC lamellas, with manual drive through ribbon and collector, equipped with all accessories. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water tightness according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

333,30 €
RE0097u

Aluminum exterior carpentry 2 sliding leaves 115x120 cm, with PVC blinds.

Supply and assembly of aluminum carpentry, lacquered white, with 60 microns of minimum thick film, for aluminum window shaped, simple sliding, 115x120 cm, basic series, formed by two leaves, and without Base construction Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Compact incorporated (monoblock), rolling blinds of PVC lamellas, with manual drive through ribbon and collector, equipped with all accessories. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water tightness according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

345,10 €
RE0096u

Aluminum exterior carpentry 2 sliding leaves 130 x 135 cm, with PVC blinds.

Supply and assembly of aluminum carpentry, lacquered white, with 60 microns of minimum thick film, per aluminum window forming, simple sliding, 130x135 cm, basic series, formed by two leaves, and without Base construction Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Compact incorporated (monoblock), rolling blinds of PVC lamellas, with manual drive through ribbon and collector, equipped with all accessories. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water tightness according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

384,69 €
RE0093u

Aluminum exterior carpentry 2 sliding leaves 140x140 cm, with PVC blinds.

Supply and assembly of aluminum carpentry, lacquered white color, with 60 microns of minimum thick film, for aluminum window forming, simple sliding, 140x140 cm, basic series, formed by two leaves, and without Base construction Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Compact incorporated (monoblock), rolling blinds of PVC lamellas, with manual drive through ribbon and collector, equipped with all accessories. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water tightness according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

398,78 €
RE0100u

Enclosures, 2 sliding leaves Balcony 1300x2450 mm., Without blindness.

Supply and assembly of aluminum carpentry, lacquered white, with 60 microns of minimum thickness of dry film, for aluminum window shaped, simple sliding, 1.30 x 2.45 cm, basic series, formed by two leaves, and with basic construction. Thickness and quality of the lacquered process guaranteed by the Qualicoat Seal. Composed of extruded profiles forming frames and leaves of 1.5 mm of minimum thickness in structural profiles. Accessories, hanging and opening tools, EPDM glazing joints, stainless steel screws, sealing elements, accessories and machining tools approved. Even proportional part of fixing staples, perimeter sealing together by means of a neutral silicone cord and final adjustment in work. Prepared in workshop, with classification to air permeability according to UNE-EN 12207, classification of water tightness according to UNE-EN 12208 and classification to resistance to wind load according to UNE-EN 12210. Fully mounted and tested by the installer company through the corresponding service tests (included in this price).

444,70 €