Indicators

CODEUDESCRIPTIONPRICE
RE0001

Ceiling plaster board, rib of 100x60 cm

Plaster plate, rib of 100x60 cm and 8 mm thick, 20 mm in thickness including the ribs with straight edge and smooth finish, uncoated, for ceilings, even proportion of straps and packing plaster on forged.

13,21 €
RE0133u

Placing anchor plate steel S-275-JR, 250x250x10 mm.

Supply and installation of anchor plate steel S-275-JR and dimensions 250x250x10 mm, with 4 holes 14 mm, arranged on concrete edge beam, drills and chemical anchor with epoxy resin or similar type DESA-CHEM, 12 mm galvanized threaded rod, nut and flat washer on basic regularized with mortar type resins AplicatecR4 or similar corrosion protection paint Thkrom or similar union and L100x100x10 mm welded angle as an element of the support beam; unit fully placed, proportional means and scaffolding necessary aid, removal of excess material and final cleaning.

42,63 €
RE0074

Demolition of plaster ceiling removable plates.

Demolition of ceiling plaster recordable plates with manual means, without damaging the building elements to which subject. Even proportion demolition straps, profiles and structures support suspension, false beams, front, moldings, cornices and finishes, cleaning, gathering, removal and manual loading debris truck or container.

11,26 €
RE0092

Rain partition wall dividing plates shaped asphalt.

Septum rain up 12 m, comprising 10 plates asphalt waves undulating profile with black cleat direct disposal of fixed plates in rows and riding the party wall directly on the ceramic support with key holes . Even proportion of accessories, finishes and fasteners. Fully assembled, with removal of excess material and container cargo. Excluding scaffolding or lifts to court.

15,94 €
RE0090

ROCKWOOL system of direct trasdoses of gypsum plasterboard with insulation incorporated in facade closings.

Direct cladding on interior partition, made with laminated plasterboard - | (10 + 30) (LR) Labelrock 406 110 | ROCKWOOL with rock wool insulation of 30 mm thick, joined the board, received with paste bonding material on the vertical surface; 55 mm thickness, even proportional reconsideration of the finish line of kitchenware, the passageways and hollow; placing successively for each plate, the pasta paletades union support in the household; cutting boards, placing wedges at the bottom and placing individual plates by pressure on paletades; formation of expansion joints; treatment of passageways and holes; execution of angles; treatment together with paste and tape together; received boxes for electrical mechanisms and accommodation facilities step, following reconsideration of its location in the plates and punching them, and final cleaning. Fully finished and ready to emprimar, painting or coating.

29,05 €
RE0135u

Supply and installation anchor plate HERMS

Supply and installation of anchor plate HERMS with four anchors 12 mm, arranged on concrete edge beam, drills and chemical anchor with epoxy resin or similar type DESA-CHEM, 12 mm galvanized threaded rod, nut and washer Flat on base regularized with mortar type resins AplicatecR4 or similar corrosion protection paint Thkrom or similar; unit fully placed, proportional means and scaffolding necessary aid, removal of excess material and final cleaning.

44,58 €
RE0208

Clad with natural stone slabs fixed with adhesive cement.

Supply and installation of vertical surface plating, up to 3 m tall, with cream marble slabs Levante polished finish of 40x20x2 cm, the ornament attached with adhesive cement support improved C2 TE with reduced slip extended open time, gray. Grouting cement mortar joints, CG1 for meeting minimum (between 1.5 and 3 mm), with the same tone of the pieces. Even proportion of preparation of plates and utensils support, training boxes, cuts, edges of shots, conducting meetings with other materials, boards, PVC and special cruise.

59,49 €