Flexible coatings

CodeUDescriptionPrice
RE0063m

Raised Petri coating in staggered scale.

Raised from the Petri coating of steps, with pneumatic hammer, withdrawal and loading of rubble on truck or container, and without landfill transport.

6,61 €
RE0050

Breaked cement mortar base, master.

Training on facades and interior walls, of base layer of 15 mm thick, for continuous double layer coatings, with plastering of cement mortar, gray, cement composite, selected aggregates and additives, end-up, waterproof finish 'rain water. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block. Even proportional part of preparation of the surface support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, training joints, corners, masters, edges, grindings, branches, lintels, finishes in meetings with walls, coatings or other elements received on their surface.

18,79 €
RE0049

Base buzzer, with cement mortar in good view.

Formation on facades and interior walls, of 15 mm thick layer, for continuous double layer coatings, with plastering in good view of cement mortar, gray, cement composed, selected aggregates and additives, endewly finished, waterproof to rainwater. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block. Even proportional part of preparation of the surface support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, training joints, corners, masters, edges, grindings, branches, lintels, finishes in meetings with walls, coatings or other elements received on their surface.

13,41 €
RE0210

Breakdown, with cement mortar.

Coating of interior and exterior paraments with plastering of industrial mortar for plastering, 15 mm thick, gray, smooth finish, for the realization of the base layer with continuous double layer coatings, finished lirred, thickness 15 mm, Applied manually, armed and reinforced with anti-mesh in the material changes and in the forged fronts.

26,70 €
RE0040

Demolition of internal partition factory coated, thick 4/5/7 cm.

Demolition of interior partition factory coated, formed by simple vacuum brick of 4 to 7 cm thick, with manual means, without affecting the stability of the contiguous constructive elements. Even proportional part of demolition of its coatings (plaster, mortar, tiled, etc.), embedded facilities and carpentry, prior disassembly of the leaves; Cleaning, gathering, withdrawal and manual load of rubble on truck or container.

5,26 €
RE0042

Demolition of interior partition factory coated, 5 cm massive brick in Panderete.

Demolition of interior partition factory coated, formed by massive brick in Panderete of 5 cm thick, with manual media, without affecting the stability of the contiguous constructive elements. Even proportional part of demolition of its coatings (plaster, mortar, tiled, etc.), embedded facilities and carpentry, prior disassembly of the leaves; Cleaning, gathering, withdrawal and manual load of rubble on truck or container.

6,76 €
RE0041

Demolition of interior partition factory coated, perforated brick Thickness 11 cm.

Demolition of interior partition factory coated, formed by perforated brick of 11/12 cm thick, with manual means, without affecting the stability of the contiguous constructive elements. Even proportional part of demolition of its coatings (plaster, mortar, tiled, etc.), embedded facilities and carpentry, prior disassembly of the leaves; Cleaning, gathering, withdrawal and manual load of rubble on truck or container.

9,32 €
RE0212

Chopped coating plastered with plaster.

Piece of plaster coating applied on vertical parament of up to 3 m in height, with electric hammer, eliminating it totally without deteriorating the surface support that will be discovered and prepared for later coating. Even proportional part of cleaning, gathering, removal and manual cargo of rubble on truck or container.

8,27 €
RE0211

Chopped coating Monolayer mortar.

Chopped monolayer mortar applied on internal vertical parament of up to 3 m in height, with electric hammer, eliminating it totally without deteriorating the surface support that will be uncovered and prepared for its subsequent coating. Even proportional part of cleaning, gathering, removal and manual cargo of rubble on truck or container.

9,83 €
RE0108

Acrylic plastic paint on exterior walls. Facades

Decorative coating facades with smooth plastic paint, for the realization of the finishing layer in continuous double layer coatings; Previous cleaning and repeat of mortar support, background hand and two finishing hands (performance: 0.1 l / m² each hand), as well as treatment against the presence of mold or humidity in 10% of the Its surface

9,96 €
RE0245m

Rascat coating existing existing in coated wood surface.

Rascat of existing coating existing in wood surface, with manual means, by means of scratch and spatula, and subsequent polished surface with mechanical means, by means of scrubber with metallic barbed disk. Even p / p cleaning, stacking, removal and manual load of remains on truck or container.

7,71 €
RE0064m

Successful repair forged singing and coating, width 35 cm.

Sanitation and repair forged singing Width 35 cm, Main and rear access to housing, prior chopped coating or in poor condition, structural sanitation of structural concrete, passivate of armor and reconstruction of the Affected section with resin mortar type applicatecr4 or similar, reconstruction of edges and surface finish with raised cement mortar 1: 6 in good view, final coating application with painting in silicate in tones similar to existing tones, even All auxiliary means, necessary scaffolds, removal of excess material and cleaning.

39,53 €
RE0207m

Natural stone streak coating, Llevant cream.

Supply and placement of strain coating with a straight shape, on a scale of 100 cm wide, by assembling the following elements: Extended marble Levant cream, polished finish and marble striker Llevant cream, polished finish of 3 and 2 cm thick respectively, face and polished edges, received all this with M-5 cement mortar, placed on a previous step (not included in this price). Even running with cement board mortar, CG1, for minimum board (between 1.5 and 3 mm), with the same tonality of the pieces.

72,15 €
RE0002

Painting coating in exterior silicate

Decorative coating of facades with paint in silicate, for the realization of the finishing layer in continuous double layer coatings; Cleaning and repeat before support in good state of conservation, background hand with a preparation based on potassium silicate and acrylic emulsions and two finishing hands (performance: 0.167 l / m² each hand).

11,10 €
RE0226

Monolayer coating on facades, on pillars and forged in front

Training on continuous coating facade of 20 mm thick, waterproof in rainwater, with monolayer mortar for waterproofing and decoration of facades, scraped finish, white color, compound of cements, additives, synthetic resins and mineral loads, with Placement of fiberglass mesh antalcalis in the center of the thickness of the mortar, to arm it and reinforce it. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block, after application of a layer of waterproof mortar, 10 mm thick, composed of cement, selected aggregates and additives, in those places where S ' appreciate plain or adhesion deficiencies (25% of the surface of the parament). Even P / P surface preparation support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, Training of joints, corners, masters, edges, grindings, branches, lintels, finishes in the meetings with walls, coatings or other elements received on their surface, and / assembly, disassembly and rental of propiments approved.

27,65 €
RE0390

Monolayer coating, on forged saddles and fronts.

Formation in continuous coating facades of 20 mm thick, waterproof in rainwater, with monolayer mortar for waterproofing and decoration of facades, frosted finish, color similar to the existing one, composed of cements, additives, synthetic resins and Minerals loads, with placement of fiberglass mesh antalcalis in the center of the thickness of the mortar, to arm it and reinforce it. Manually applied on a ceramic brick surface, brick or concrete block or thermoargile block, after application of a layer of waterproof mortar, 10 mm thick, composed of cement, selected aggregates and additives, in those places where S ' appreciate plain or adhesion deficiencies (25% of the surface of the parament). Even P / P surface preparation support, placement of fiberglass mesh antalcalis for reinforcement of meetings between different materials and in the forged fronts, 20% of the surface of the parament, Training of joints, corners, masters, edges, grindings, branches, lintels, finishes in the meetings with walls, coatings or other elements received on their surface, and / assembly, disassembly and rental of propiments approved.

32,57 €
RE0381

Promastic fiber coating, for tread finish.

Application of Bituminous Master Promastic Fiber, up to 2 mm thickness, upon cleaning of the support, aspirated from residual powder, printing hand with 20% diluted printing, and finished with 2 hands of promotic, average performance 2-2.5 kg / m² and layer, according to manufacturer's indications.

19,67 €
RE0114

Sanitated from the floor-silling coating. SUP 30%.

Sanitation of the coating of the terrace's sills, consisting of the punctual chopping of areas in poor condition and reconstruction with cement mortar Dosage 1: 6, even withdrawal of excess material and cleaning.

15,81 €
RE0121

Thermocal thermocal system of thermal insulation and mineral facades coating.

Facade energy rehabilitation, through thermal insulation and mineral facade coating, on its outer face, with the Thermocal Dbblok system, consisting of a layer of mortar of thermal and acoustic insulating, thermocal, 20 mm thick, applied through Mechanical projection with a 15 kg / m² performance, and a layer of lime monolayer mortar, Ibercal Master 450 Thermo, endeared finish, color to choose, 10 mm thick.

32,07 €
RE0014u

Inspection tasting in plaster coating.

Inspection tasting in plaster coating, at a height of up to 3.00 m, for the inspection of the different layers and type of base material, with manual means, without including the replacement of them.

30,38 €